Hi, after having experienced some "remote connection error" in my Mavic Pro Alpine White I started to investigate.
The first issue was due to the cable between the left port of the controller anche the smartphone, I changed the cable with one from the lower USB port to the smartphone, something seems to go better, but after a little fly I see the error again.
I started to watch inside the folders in the airplane looking for logs, and I have seen the fatal.log is growing and growing .
Looking in the fatal.log I see many row like these:
(...)
05-10 00:42:57.377 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.478 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.579 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.680 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.781 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.882 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.983 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:58.084 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
(...)
the log grow about 1 MB/10 mins .
I tried to:
- reset to factory default
- downgrade the firmware from 01.04.0500 to 01.04.500 with Assistant 2
- reupgrade from from 01.04.0400 to 01.04.0500 with Assistant 2
- calibrating IMU
- calibrating gimbal
- changed intelligent battery
- downgrade the firmware from 01.04.0500 to 01.04.100 with Assistant 2
- reupgrading from from 01.04.0400 to 01.04.0500 with APP
but the fatal.log is growing and growing
I am afraid to have a crash of the airplane while flying and to lose it.
Any suggestion ?
Thank you
The first issue was due to the cable between the left port of the controller anche the smartphone, I changed the cable with one from the lower USB port to the smartphone, something seems to go better, but after a little fly I see the error again.
I started to watch inside the folders in the airplane looking for logs, and I have seen the fatal.log is growing and growing .
Looking in the fatal.log I see many row like these:
(...)
05-10 00:42:57.377 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.478 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.579 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.680 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.781 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.882 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:57.983 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
05-10 00:42:58.084 F/DUSS&53[ sdp_sbuf_get_i: 184]: ( 251): faile to get bufferd
(...)
the log grow about 1 MB/10 mins .
I tried to:
- reset to factory default
- downgrade the firmware from 01.04.0500 to 01.04.500 with Assistant 2
- reupgrade from from 01.04.0400 to 01.04.0500 with Assistant 2
- calibrating IMU
- calibrating gimbal
- changed intelligent battery
- downgrade the firmware from 01.04.0500 to 01.04.100 with Assistant 2
- reupgrading from from 01.04.0400 to 01.04.0500 with APP
but the fatal.log is growing and growing
I am afraid to have a crash of the airplane while flying and to lose it.
Any suggestion ?
Thank you