Hello again
well, in severall ebay anouncements, everyone to Mavic1Pro, in on off them i could see the measures of the axis components, i compare them to my
M2Z axis components and all off them are the same except the base who assemble to the drone frame,
OK, so fare so good, i bought the item, 30days to delivery,
for what i can look, in the mainframe of drone body, it seem´s me the M1P could fit, if not, disassemble both axis and change the bases

then fit it again in the drone,
in my case the steering off the axis get broke, in my work i machined a new steering and it solve the problem, solve but not resolve because the body off the axis is making force on the drone bodiframe, this issue ill be solved at m1p axis arrive
go out for some tests, everything OK, very stable, and slowly get more free, could get the same speed´s, everything ok, than make fly to outfield at 100m off altitude
sudently ... gimball get stucked for left side watching left arm and drone descontroled, automatic autolanding get activated, and dropped to 50m altitude, STRESS moment, in the moment i think in arm fail ...canceled autolanding and drone go up to 75m, clicked in gimball down and forward, drone get establized and could return home
drone returns with 4 propleres cutted, the both front arms 80% cutted in antennas zone !!!
soo What **** append here ???
i was not recording, and whatching flydata the only thing makes sense was bird attack, both arms get to back position, they did not full close because rear props

was the rear props who cutt the front arms, i dont know if was in the moment trying get drone up that front arms go to Open position again,
People, this ******* drone, close arms, cuut arms by antenns zone, opne arms, get establized and return home
THIS IS GOOD MACHINE, is my opinion

other drone will fail in the sky

very lucky didnt lose antennas and props dont blow and any arm get out off body frame
the drone will be assisted by Care Refresh
my steering get the job done,
but the axis test willl be concluded

mavic1pro axis
the component i make, is te one with 21.20mm