Gimbal dislocated after minor crash - fix? - Not the known issue.

[ethraphar]

Hi there,
my first post with some strange news.
It occured two days ago.
I've flewn my Mavic in sport mode forward and wanted to make a move to get height and to yaw to the right.
But all of a sudden - i didn't hit anything, i would have heard that - the engine turned off and my Mavic fell on the ground. Lucky me it wasn't high and on moist grass. But: what the hell?
Here's the footage:

On the first glance everything was alright. No broken propellars or damage on the mavic itself. The lift off showed no problems at all regarding flight consistency. But the camery was off and the gimbal looked dislocated.

Today i took a depper look and here are the pictures of what i think is the problem:
https://i.imgur.com/UFnUqBV.jpg
https://i.imgur.com/m4e9SAF.jpg

Is this normal? Or do I have to "clip in" the gimbal on the marked spot? Could i do this on my own? The tabs on the corners and the back center , which are normally known as the problem, are totally fine.

Thanks in advance!
Best regards

 

[Rnl]

Yea you can do it, and make sure it's under the back clip.

 

[euphin]

I might have the same problem as you..w hat did you do to repair it? thanks

 

[Rnl]

Just make sure it's under the clip