Gimbal settings missing, camera wont move.

[areal223]

All,

I was out flying today after a little break. (2 months ish) Got up in the air flew around using the tilt wheel. All of a sudden in mid flight my camera lost all movement ability. Stayed cocked and couldn't control the camera.

Got it landed safely then noticed the gimbal settings were missing from the App. Still getting video from the drone just cant move camera.

Upon start up the gimbal doesn't go up or down, no movement at all. *still picture.

No issues with ribbon cable all connections secure to the body of the done. Didn't remove gimbal to inspect.

Any thoughts to my issue?

 

[Thomas B]

Does it move freely when the drone is off? Do you have any filters or other attachments on/near it. What kind of drone?

 

[ZX14-R]

Update Update ??
Calibrate?

 

[Moose1967]

I agree do all the updates and make sure you remove the gimbal clamp.

 

[areal223]

Does it move freely when the drone is off? Do you have any filters or other attachments on/near it. What kind of drone?

Yes it does move freely when off, no filters or any attachments.

 

[areal223]

Yes it does move freely when off, no filters or any attachments.

also on startup it doesn't move at all. But i still get video via the USB connection and phone.