Gimbal shake and overload

[VJRice]

The last time I flew my MP there was a hint of shake. Today it has a bad shake in the video stream and gave me a error for gimbal shake then in a few minutes gave a gimbal overload. So I landed and was checking it out on the ground it has video but does not pan down and it freaks out and does it recentering. Is the flex cable bad? Thanks for any help.

 

[BD0G]

Make sure you the gimbal anti-drop bracket(s) are holding the gimbal correctly and not allowing the gimbal assembly to ride over the bracket instead of being contained by it.
Or that the bracket is not broken off.

See this post for a similar issue

Gimbal Obstruction

 

[VJRice]

I checked and it was under the 3 legs.

 

[BD0G]

Try Gimbal Re calibration to see if it can complete it.

 

[VJRice]

Thanks for the reply. Tied that too and it will not complete. Only made it to 5%

 

[Former Member]

Is the flex cable bad?

Probably, or could be your gimbal motor assembly.