Gimbal will not hold the horizon/ YAWs without stick input

[sar104]

@sar104

Performed another flight, created another log.
MCDatFlightRecords folder is still empty after uninstalling and re-installing.

Unfortunately I have no other suggestions.

 

[pmshop]

Unfortunately I have no other suggestions.

I appreciate your time.

 

[Starz]

Unfortunately for the op, another example of calibrations not solving the issue.
Hope you get this solved.

 

[pmshop]

Unfortunately for the op, another example of calibrations not solving the issue.
Hope you get this solved.

Thanks. I appreciate.

 

[DanMan32]

IOS or Android?
My Android has DAT files where they should be.

 

[pmshop]

IOS or Android?
My Android has DAT files where they should be.

iPadOS 13.2.3
Remember, since 13, there are now two distinct Apple OS
iOS for phones, iPadOS for iPads.

 

[JoelP]

I had a yaw issue with my MA for quite some time and fixed mine with a stick recalibration. It looked centered in the log just like yours, but it was not. There is no way for the system to know if the stick is centered. It just records if the stick deviates from the calibrated position.

It wasn't the stick - the flight log posted earlier shows it properly centered.

View attachment 86415

 

[sar104]

I had a yaw issue with my MA for quite some time and fixed mine with a stick recalibration. It looked centered in the log just like yours, but it was not. There is no way for the system to know if the stick is centered. It just records if the stick deviates from the calibrated position.

You misunderstand what is recorded in the log. The rudder output, not the physical stick position, is what is recorded in the log file, and it was zero for most of the flight, so no yaw was commanded, by definition.

 

[Tysoni88]

Hi!
I am new here. My first post. I also have problems with horizon level. I have small crash a month ago but after that everything was fine. This horizon level problem started few weeks ago. First the horizon is usually at level but then it tilts and dosen't come back to level. Everything looks fine, all parts are in place, every calibration has been done few times.
Here is photo from this morning.