Hard shell box

[m3sgal]

Anyone know if there is a hard shell box shaped for MM, where you can fit it inside snuggly to protect it?
If not, anyone has the necessary skills, printer, and will to do it?

 

[old man mavic]

@m3sgal i got mine off Ebay cost £40.20p just type in hard case for MM and there will be several listed

 

[Skybuyer]

Of course you will be able to find a hard shell case somewhere. And like you I wanted a hardshell case but had initially ordered a semi-hard case. However, what I discovered is that I could take the inner foam, custom cut from that case, around $16.50 Mavic Mini semi-hard case.
and put it in an Apache 2800, available from Harbor Freight Tools costing around $22 with their regular discount for a total of $38.50 total for both cases. Apache 2800 case

The great thing is that the smaller semi-hard case fits easily in my backpack and the 2800 can fit too, though a tight squeeze. When I got my Mavic 2 I returned the 2800 and did the same thing with a semi-hard case and the LARGER Apache 3800, same concept, the latter of which I have a photo of. Works the same way with the Mini case and the 2800. It's a very close fit with just a little room around the edge for a flat accessory or two. The photo with the camera is the 2800 with the camera inside for size perspective. Sorry I don't have a photo of the Mini and the 2800. FWIW, I really like the semi-hard case for the Mini.

 

[m3sgal]

Maybe I wasn't clear. I should've put emphasis on shell. As in a hard shell that is exactly the size of the MM alone. You place it inside and close it. So that it is compact, yet provide enough protection to be placed in a backpack or a case. Something the size of the MM, and made out of hard plastic

 

[old man mavic]

Maybe I wasn't clear. I should've put emphasis on shell. As in a hard shell that is exactly the size of the MM alone. You place it inside and close it. So that it is compact, yet provide enough protection to be placed in a backpack or a case. Something the size of the MM, and made out of hard plasticView attachment 112859

sorry havent seen anything like that i am afraid ,but there is probably something out there hope you find it
just a thought there are many ,many ,hard food container boxes that would be suitable for the MM to fit in ,with some foam for support ,and most of them have a airtight lid ,might be worth a try

 

[Tolly]

Maybe I wasn't clear. I should've put emphasis on shell. As in a hard shell that is exactly the size of the MM alone. You place it inside and close it. So that it is compact, yet provide enough protection to be placed in a backpack or a case. Something the size of the MM, and made out of hard plasticView attachment 112859

Don't know if you can get one but i want one! that is a great idea.

 

[CappyKD]

Here is a reasonably priced Hard Shell case that avoids the Prop deformation issue. HTH I ordered one for my new Mini and it arrives tomorrow. I saw this case on a youtube review and I like the fact that you can store the drone unfolded to avoid the prop issue that seems to occur in the FM case.

https://www.amazon.com/gp/product/B082XDXP87/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

 

[Flaming]

Maybe I wasn't clear. I should've put emphasis on shell. As in a hard shell that is exactly the size of the MM alone. You place it inside and close it. So that it is compact, yet provide enough protection to be placed in a backpack or a case. Something the size of the MM, and made out of hard plasticView attachment 112859

I have a 3D printer and I do have a "blueprint" to print a hard shell for the MM just like this one.
ill try to make one and report back here -

 

[m3sgal]

Looking forward to the result. Extra points for a lanyard slot

 

[Flaming]

Processing ..... lol

 

[Flaming]

First part is on the machine .. .. results in 9-10 Hours

 

[Tolly]

Looking good

 

[Flaming]

Bottom part done .. and test fit.

i just realized that i completely forgot to modify the model to add a lanyard slot

Now i need to make the lid

 

[Tolly]

Cracking Not worried about a lanyard slot as it will go in a backpack as is

 

[Flaming]

final results ... 20 hours to print this ... LOL ... so slow

 

[Tolly]

Unique though, its the only one in the world

 

[m3sgal]

Is it PLA?

 

[Flaming]

I used PLA 1.75mm ecotough 2.0 fiber with 60-70C heat resistance , also UV resistant.
210C on the extruder and 72C for the bed , 50 mm print speed , 0.16mm layer height.

 

[gloover]

Unique though, its the only one in the world

Not realy, the 3D print of this case could be downloaded since half a year here:

Mavic Mini / Mini 2 Case - Minimal - Like a Glove by rosscadguy

11 Jan 2021: Uploaded a STEP file. Modify to your heart's content.NOTE: This case works identically for the DJI Mini 2. I have both Mini drones and they both fit in this case perfectly. The Mini 2 is the exact same size as the original Mini.I wanted the smallest possible hard-shell protective...

www.thingiverse.com

 

[Flaming]

LOL ...I never said it was unique nor that I made the model. But I did printed the lid in one go instead of 2 parts.