DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Hello from South Africa

Greetings from Birmingham Alabama USA, welcome to the forum!
 
Hello from the Crossroads of America Ruan.

Welcome to the Forum. :cool:
 
Welcome to the forum.
Please and do be sure you have read our guidelines.
I hope you will find our site helpful and look forward to any input , photo's/video's you might post .
Don't be shy and ask anything if you can't find it by searching . Thumbswayup
 
Welcome to Mavic Pilots! :) Enjoy the forum!Thumbswayup
 
Hello everyone. New pilot here from SA. Just bought my first Air 2S and looking forward to learning as much as I can about it.
Hello and welcome from sunny Savannah, GA! Enjoy your stay and I hope you find this forum as informative and entertaining as I do!
 
New pilot here from SA. Just bought my first Air 2S and looking forward to learning as much as I can about it.

Welcome from the Hampton Roads area of Virginia, USA. We have a Member's Map in the Upper Right of the Title Bar. Click on "Members" and then Click on "Member's Map…" Check it out and you might find some new flying friends.


Since you live in South Africa, there are specific laws and rules for you to follow, please check to ensure these are current.


Even if you may have flown Drones before, here is some Good Old Fashion Advice…

Do not let the excitement of the moment get the best of you. When you are going out to fly, do it slowly and deliberately. Get used to a set procedure and even practice it.

There are so many things I could write but these are the highlights that I feel need mentioning.

Plug in your phone/tablet into your controller; turn on the Controller and DJI Fly App (if it does not start on its own…). On the Drone, open the front legs, then open the back legs, then remove the Gimbal Cover.

The Gimbal is the most delicate item on the Drone and banging or bumping can damage it. I also fastened a short "Remove Before Flight" ribbon to the cover so it's more noticeable and I do not forget to remove it…

Turn on the drone and watch it come to "life." Watching the Gimbal go through its self-check is almost like watching a kitten or puppy opening its eyes for the first time…

Place the drone down (preferably on a Landing Pad) while it finishes its self-test (collecting satellites, etc…).

Check your battery status (Phone, Drone, and Controller), check the Signal Strength, by now the Controller should have reported it updated the Home Point.

Lift off, 4-5 feet (1-1/2 meters) or so, hover a bit, check the controls (move the drone a bit forward, back, left, right, yaw left and right). By now, your Controller will probably report again, Home point Updated.

If you go out in a rush and race thru your start up and take off before the drone has finished it prep, it may update its Home Point over that pond or that old tree you are flying over and in your excitement, you'll fly the drone long past it Low Battery point and when it engages Return to Home and lands in the pond or in a tree; it will be all on you…

Now go have fun, learn to fly the drone by sight before you try to fly it out a distance depending on the video feed, FPV.

I would also advise you to use YouTube and watch a lot of the Videos on flying and setting up the Drone. When it is too dark, too cold, or too wet, you can "fly it vicariously" through YouTube. Also watch some of the Blooper Drone Videos and learn how not to fly your "New Baby."

Below is the link to all of the downloads offered by DJI for the Mavic Air 2s, including the User Manual.

After you read the Manual, read it again, you will be surprised what you missed the first time and you will be better prepared for that first "scary moment…"


Happy Droning…
 
Welcome to the forum! :)
 
Lycus Tech Mavic Air 3 Case

DJI Drone Deals

New Threads

Forum statistics

Threads
130,599
Messages
1,554,259
Members
159,605
Latest member
petravka