Hello from the Gold Coast

[Steve29]

Bought a new Mavic pro a week ago and flown it 4 times. I'm so stoked with it. I am a experienced pilot as I have been flying my P3 4k for about 1 and a half years.
I will need to get some filters, what does everyone use and can recommend [emoji846]

 

[dirkclod]

Welcome to Mavic Pilots .
I hope you will find our site helpful and look forward to any input , photo's/video's you might post .
Don't be shy and ask anything if you can't find it by searching .

 

[msinger]

Welcome to the forum!

 

[Fleek]

Hi, I'm at Sunshine coast area. I got Skyreat filters which are fine except you have to take them off to put the gimbal protector on, which is a pain as the filter/lens is fiddly to remove. Having to buy a separate tool for removal. Hear that Polarpro, and then the DJI ones, stay on with the gimbal holder. Cost more but I would buy one of those if I did it again.
Where around Gold Coast do you like flying? I liked Fingal Head but I'm not brave enough to fly out to the little island there. Don't know any other places around there.

 

[Steve29]

Thank you [emoji4]. Fleek thanks for the info, I'll check out polarpro as I had them for my p3 4k. My local test flight place is Pizzy park, Hinze dam/Advancetown lake west and east boat ramp is good, other then that I haven't really flown much around the goldy I usually travel to places like the sunny coast or down south. I haven't flown at Fingle yet but I'd love to go soon.
I flew mostly last year when I traveled around Australia in lots of places.

 

[Steve29]

This morning at Brunswick heads NSW

 

[AussieDrone]

Welcome and nice photo.

I use PGYTECH ND/PL filters. They do a good job. Polar pro are very highly recommended as well. There are multiple threads on this subject, so do a simple search..

 

[Former Member]

Welcome to Mavicpilots.com. If you ever need advice or repair questions, feel free to reach out to the forum.

Best regards and good luck,

Rob

 

[Aerial-Pixel]

Welcome to Mavic Pilots from Dayton Ohio USA! Enjoy your new Mavic Pro, Fly safe and have fun!

 

[Steve29]

Welcome and nice photo.

I use PGYTECH ND/PL filters. They do a good job. Polar pro are very highly recommended as well. There are multiple threads on this subject, so do a simple search..

Yep will do. Thanks mate

 

[AussieDrone]

No worries mate.. there is an ebay special at the moment.. 20% off... if you want to get some filters may be now is the time.. also as an alternative, there are single filters mostly PL ones for $15 or so if you want to try one before getting a full set ..

 

[Steve29]

No worries mate.. there is an ebay special at the moment.. 20% off... if you want to get some filters may be now is the time.. also as an alternative, there are single filters mostly PL ones for $15 or so if you want to try one before getting a full set ..

Yeah cool I'll check em out now. Nah I'll buy a full set. Looking at polarpro or sandmarc as they pass the calibration test. Thanks for the info [emoji108]

 

[AussieDrone]

Yeah cool I'll check em out now. Nah I'll buy a full set. Looking at polarpro or sandmarc as they pass the calibration test. Thanks for the info [emoji108]

Let us know how you go.. good luck

 

[Bunny Too]

Bought a new Mavic pro a week ago and flown it 4 times. I'm so stoked with it. I am a experienced pilot as I have been flying my P3 4k for about 1 and a half years.
I will need to get some filters, what does everyone use and can recommend [emoji846]

Howdy from Wyoming @Steve29 , welcome to the community, plenty of fine folk and excellent information here.

 

[Steve29]

Let us know how you go.. good luck

I ended up getting the polarpro filters, CP, ND 8 and ND 16 3 pack, that's all I need. [emoji108]

 

[AussieDrone]

I ended up getting the polarpro filters, CP, ND 8 and ND 16 3 pack, that's all I need. [emoji108]

Nice work mate.. now post some nice photos