HELP!!! Version Mismatch???

[tfort234]

Updated new firm ware now it won’t fly.
Saying Version mismatch: Update all modules. I’m new to this not sure what to do to fix it.

 

[Keule]

With Assistant 2 do a 'refresh' firmware.

 

[tfort234]

Ok is that something that has to be done with a PC?

 

[Keule]

Ok is that something that has to be done with a PC?

Yes - a PC or Mac is required.

 

[tfort234]

Do I do both controller and drone?

 

[Keule]

Do I do both controller and drone?

To be on the safe side, do both.
Try AC first - Reboot AC and try to connect with RC and GO4 app. If no errors pop up, you are good to go.

 

[tfort234]

Thanks. I’ll try it

 

[tfort234]

I’m not having any luck. I can’t get it to read it on assistant

 

[MichiganMavic]

I’ve had that message and had to do batteries as well. Battery Error came up on RC. After you do the RC and bird, do all batteries as well.

 

[MichiganMavic]

I’m not having any luck. I can’t get it to read it on assistant

Remove the Assistant App and reinstall. Try another cable and different USB port.

 

[tfort234]

Got it to work on different computer. I just downgraded back to the previous firmware I couldn’t the newest to update.

 

[tfort234]

Can I do the batteries using the go app or do I have to do each one through assist in the drone?

 

[MichiganMavic]

Can I do the batteries using the go app or do I have to do each one through assist in the drone?

Since you did a different firmware, install each battery and start up for a few minutes. If no battery error displays, no need for that.

Through Assistant on PC:
If it does display the error, you connect the craft, start drone, and a Update mismatched Module should come up, update, turn off, rinse and repeat for each battery. That’s what I did for 5 batteries.