I pad mount for MA2
- Thread starter Rchawks
- Start date
Thx for that. After more research I found this mount and as a extra they threw in a cable which i really like the look of, coiled and short.
Product Page | LifThor Shop / TDW
www.thorsdroneworld.com
a polar pro, misschrissy and this one.once i decide which I prefer I will move the others along.
I made a 3D printable holder for 8 inch tablets.
Here is the link to Thingiverse:
www.thingiverse.com
There is also a version for 10.5 inch tablets. But I am not sure if it works since I am not able to test it.
Here is the link to Thingiverse:
Tablet Holder for DJI Mavic Air 2 by Sven_Jakob
Simple holder for 8-inch tablets on the DJI Mavic Air 2 Remote. Support needed for printing. 22-May-2020: I have added a second improved version. Turn clockwise to clamp it between the two rods of the remote. 23-May-2020: I added a Sunshade for the iPad Mini that is compatible with Version 2 of...
www.thingiverse.com
There is also a version for 10.5 inch tablets. But I am not sure if it works since I am not able to test it.
I’ll second or third that on the iPad mini holder from Miss Chrisy. I have one and its all you need...simple, small, and very light.You are quite welcome Miss Chrisy. I am sure the owners of the Mavic Air 2 will see the great value to getting one of your Tablet holders as it is much lighter than any other options mentioned here, can be used with the stock lightning cable that comes with the drone, but MOST of all, it does not cover any part of the front control panel or the sticks. This is the perfect tablet holder AND it is the least expensive of them all. And it can be setup quite easily without tools or screws. I highly recommend this tablet holder AND also the lanyard mount which can easily be used in conjunction with each other.
This one is perfect, AND will work with the cord that comes with the MA2. $13.00 for Ipad Mini... $15.00 for larger IPAD. Stock cord only works with Mini.
This item is unavailable - Etsy
Find the perfect handmade gift, vintage & on-trend clothes, unique jewelry, and more… lots more.www.etsy.com
I have this and it works very well although the stock cable is a tad short for it so I use an apple cable with it.
Attachments
I bent one out of a bit of piano wire, did post a pic on here a fortnight back, it holds a ipad very tight for what it was.
Tablet holder for Air 2
Just a quick vid on making a tablet holder for the Air 2 controller. Took ten mins to bend up and quite effective. Hope this helps someone.
mavicpilots.com
snappy1
Well-Known Member
I am having one printed for the 10.5 using your design. I will let you know when I get it if it fits. Thanks for the design.I made a 3D printable holder for 8 inch tablets.
View attachment 103101
View attachment 103102
View attachment 103103
Here is the link to Thingiverse:
Tablet Holder for DJI Mavic Air 2 by Sven_Jakob
Simple holder for 8-inch tablets on the DJI Mavic Air 2 Remote. Support needed for printing. 22-May-2020: I have added a second improved version. Turn clockwise to clamp it between the two rods of the remote. 23-May-2020: I added a Sunshade for the iPad Mini that is compatible with Version 2 of...
There is also a version for 10.5 inch tablets. But I am not sure if it works since I am not able to test it.
Find a friend with a 3D printer. This mount was about 27 cents US in plastic and about an hour of print time. 
Yeah, I noticed that too. When people first started posting about them here they were $12. I bought mine at $13+ shipping, now they're over $20. I don't like doing business with people who jack their prices daily for no other reason than they feel like they can, and probably won't buy anything else from them.
I also had the Skyreat tablet mount for my MM. I found that placing the square piece of foam that came in the Fly more kit works to stabilize the mount just fine.
I also like many of the other solutions here, but until then just try this. I also drilled a 1/2 inch hole to shorten up the cable distance so my 20cm cable reaches just fine.
Drone1aerial
Well-Known Member
- Joined
- Feb 10, 2018
- Messages
- 45
- Reactions
- 11
- Age
- 56
snappy1
Well-Known Member
I made a 3D printable holder for 8 inch tablets.
View attachment 103101
View attachment 103102
View attachment 103103
Here is the link to Thingiverse:
Tablet Holder for DJI Mavic Air 2 by Sven_Jakob
Simple holder for 8-inch tablets on the DJI Mavic Air 2 Remote. Support needed for printing. 22-May-2020: I have added a second improved version. Turn clockwise to clamp it between the two rods of the remote. 23-May-2020: I added a Sunshade for the iPad Mini that is compatible with Version 2 of...
There is also a version for 10.5 inch tablets. But I am not sure if it works since I am not able to test it.
I had one of your mounts printed for the 10.5" tablet. Mine has a silicone cover on the back and it is a very tight fit. I would like to see it about 1/4"-3/8" longer. If you change it, let me know and I will have another printed. Thanks.I made a 3D printable holder for 8 inch tablets.
View attachment 103101
View attachment 103102
View attachment 103103
Here is the link to Thingiverse:
Tablet Holder for DJI Mavic Air 2 by Sven_Jakob
Simple holder for 8-inch tablets on the DJI Mavic Air 2 Remote. Support needed for printing. 22-May-2020: I have added a second improved version. Turn clockwise to clamp it between the two rods of the remote. 23-May-2020: I added a Sunshade for the iPad Mini that is compatible with Version 2 of...
There is also a version for 10.5 inch tablets. But I am not sure if it works since I am not able to test it.
johnsctt78
Well-Known Member
- Joined
- Nov 14, 2017
- Messages
- 158
- Reactions
- 69
- Age
- 68
I purchased one of Miss Chrissy's mount as well as her lanyard holder. Received the two and was very inpressed with the swift shipping and instructions with pictures. Products are exactly what i was hoping for as they are very nice and function perfectly. Very impressed with this company and it's detail to the customer's needs.
I have the Thor in route to me right now. With it being a bigger mount I wanted something for travel or when I needed to pack light but want to use a bigger screen than my phone. Found this one on Etsy for the iPad mini 5 and love it. Very solid, it's not going anywhere. It also has a built in lanyard hook.
It's very form-fitting for the iPad Mini 5, so much so I had to sand it just a little to work with my dbrand skin and anti-glare film screen protector. It came perfectly black (comes in other colors) but you can see where the sandpaper was rubbing as I sanded a little off the inside lip. Since the photos I used 1500 and 2000 grit sandpaper and it's back to black.
If you have a iPad mini 5 this is a nice mount. The seller also has an YouTube link on his Etsy page.
www.etsy.com
It's very form-fitting for the iPad Mini 5, so much so I had to sand it just a little to work with my dbrand skin and anti-glare film screen protector. It came perfectly black (comes in other colors) but you can see where the sandpaper was rubbing as I sanded a little off the inside lip. Since the photos I used 1500 and 2000 grit sandpaper and it's back to black.
If you have a iPad mini 5 this is a nice mount. The seller also has an YouTube link on his Etsy page.
DJI RCN1 Remote Controller Mount. Works With Any DJI Drone - Etsy
DJI RCN1 Remote Controller Mount Works with any DJI drone that uses the RCN1 controller. (Controller shown in the listing) --Designed for iPads without a screen protector-- -Gen 6 mini iPad version (one option) -4th Gen/5th Gen version (one option) ~ Fits the RCN1 controller for DJI Mini 3 Mini 3
www.etsy.com
Attachments
Last edited:
I went to Home Depot and bought Hangables. They cost about $5. you velcro them together in opposite directions and it works perfect. way more stable and no wobble with my ipad mini. you can also order them from Amazon
Similar threads
DJI Drone Deals
New Threads
-
-
-
-
Mini 3 Australian Standing Stones and Highland Skywalk- Started by Geofff
- Replies: 0
-
Forum statistics
