Landing Gear.

[Forrest]

Looking for a 3D printed gear. Was on thingaverse but, now gone.
Difficult to describe but if you have it, you know what I mean.
Thanks.

 

[Reid937]

This?: Mavic 2 legs by leenanj

 

[Dronut]

There's a few 3d printer... plans? for the Mini 2 here if you're looking to print your own. Internet Archive Search: mini 2

And a Thingiverse Archive on the same site. Thingiverse Archive : Free Data : Free Download, Borrow and Streaming : Internet Archive

 

[msinger]

 

[Forrest]

Thanks to you all for your efforts.
Ones I’m looking for print in 3 pieces, look like skis and attach via the side vents.

 

[Forrest]

 

[zeusfl]

What I do not like about the skid ones is the down sensor can be compromised.

 

[Forrest]

No sensor on mini.

 

[zeusfl]

No sensor on mini.

The mini has down sensors for landing as well as the DJI Mini 2

 

[Forrest]

Found my skids on YouTube.
Thank you all.

 

[cheddar-man]

There are "down" sensors to aid landing and for positioning when no GPS available - indoor flying for example! Learn your drone before mucking about with it!
Also, attaching anything to the Mini 2 will take it's take-off weight above the 250g so you now need to register it and a whole new set of laws apply!!!

 

[Faster]

There are "down" sensors to aid landing and for positioning when no GPS available - indoor flying for example! Learn your drone before mucking about with it!
Also, attaching anything to the Mini 2 will take it's take-off weight above the 250g so you now need to register it and a whole new set of laws apply!!!

At least here in USA (where the OP is) for now, laws are the same for a registered >250g drone vs an unregistered <250g drone. Let's see what the future holds for us.