Landing Parts replacement help, please ?

[lakeflyer]

Front Left. Seems a piece of plastic holding the pin down has broken off.



Rear Right. Entire leg.

What parts do I need? how can I fix them?

Thanks in advance.

I was flying with total responsibility, within VLOS when the drone just dropped. Little or no obstruction save for a few small trees -but I could still see the drone directly via VLOS. What parts do I need? Can I just upgrade to longer landing gear? Thanks guys for your help!

-JT

 

[BURKE52]

View attachment 74740

Front Left. Seems a piece of plastic holding the pin down has broken off.

View attachment 74741

Rear Right. Entire leg.

What parts do I need? how can I fix them?

Thanks in advance.

I was flying with total responsibility, within VLOS when the drone just dropped. Little or no obstruction save for a few small trees -but I could still see the drone directly via VLOS. What parts do I need? Can I just upgrade to longer landing gear? Thanks guys for your help!

-JT

 

[BURKE52]

Lake Flyer, you can order just the rear landing gear piece you are missing ( It snaps on) from EBAY. you have to specify which side you need. they are 13.00. I do have the right side they sent me when I didn't specify and I needed the left. Do you want my right side Landing gear. the sides are not interchangeable.

 

[BigAl07]

It's possible @msinger can help on this one.

 

[DDS]

Front left arm u need to replace they don’t sell the piece seperately
I have in stock but you would need to replace and reinstall the whole arm

 

[Detritalgeo]

The rear landing pad is simple.. but the piece cannot be purchased separately as new from DJI. You will have to find someone who has replaced a cracked rear motor arm and scavenge off that one. I did see the rear landing pad part on ebay but it is half the cost of a new arm, up to you: For Dji Mavic Air Tripod Arm Stand Left Right Motor Arm Stand Repair Parts ND | eBay

The front is not so easy... The small antenna cable that runs to the antenna element in the front landing gear is threaded through that component and it is not supplied separately. You will likely have to replace the entire arm eventually. That being said, if you found the part or a spare from another user with a completely cracked arm it can be replaced. You will have to remove the arm and remove a small panel in the back of the arm to feed the antenna through. If it still works not perhaps just leave it? otherwise you can get a new front arm assemble from china for about $40 if you have the repair experience to do it yourself (if not just get the pro to do it)

 

[lakeflyer]

Hey guys, thanks for your help. The issue was under warantee so DJI offered to repair/replace it. Its off to DJI now. Thanks for the replies.