Looking for mavic rear motor bottom caps landing gear replacements.

[iowahill]

That’s what I’m trying to figure out. Did you ever figure out how to remove the rear caps on the mavic Pro

Grab the tab lightly with pliers and gently pull. Note that there is a left and right, marked under the cap with an R or L.

 

[iowahill]

I see that Amazon has a complete repair kit that includes the rear caps and the front legs for around $26-ish:

 

[DPL]

I’ve found these on flea bay:
For DJI Mavic Pro Drone Left/Right Rear Arm Cover Landing Gear Leg Repair Parts | eBay

These are £3.33 and also ships to N America. From China so shipping might take a while.

I haven’t damaged mine but out of interest tried to remove one.
I didn’t use any tools but had to use a fair amount of “thumb force”.

I lay my bird on her back and grabbed her by the arms....... oh wait, I’ll start again. Lol.
I lay the drone on its back on carpet to save any damage should things go wrong.

1. Hold onto the rear arm.

2. Hold your thumb against the ridge and gradually increase the force with a very slight upward motion.
It will eventually give way without any damage.

Hope this helps.

 

[iowahill]

Even better than pliers!

 

[hingeman]

I see that Amazon has a complete repair kit that includes the rear caps and the front legs for around $26-ish:

Thanks "iowahill", I checked on Amazon and they have the right cap that I was missing for $4.99. Only problem is it must come from china because it takes about a month to get it. Oh well, it's been missing for quite a while so whats another month. Thanks again. Scott