M2P and Original Goggles Flight Modes

[mintakax]

A couple of questiosn:

1) When my Goggles (white ones) are connected to my M2P, the only flight modes that are available are Tap To Fly and Active track... is this the way its supposed to be ?

2) I cant seem to exit TTFM or AT using the exit button. The only way I've found works to exit is to initiate a RTH using the controller.
I've seen others complain about this in old posts, but hoped that firmware had improved. Both my goggles and M2P are latest firmware.
Thanks!

 

[MAvic_South_Oz]

Another recent thread here re goggles and another drone type (Air), I advised . . .

Have you flicked through the manual ?

https://dl.djicdn.com/downloads/DJI+Goggles/20181230/DJI_Goggles_RE_User_Manual_EN.pdf

If you look at page 19, it shows what features / intelligent flight options work with what drones . . .

 

[mintakax]

That is the RE manual, is it the same as the Original goggles ?.
Anyways, thanks, the goggles manual I have did not show the M2 drones and said that the original MP did have the other modes

 

[MAvic_South_Oz]

That is the RE manual, is it the same as the Original goggles ?.
Anyways, thanks, the goggles manual I have did not show the M2 drones and said that the original MP did have the other modes

Ah no but you can find all that on the DJI site or google.
Same deal with flight modes though.

Yes, the M1P and MPP are the only models where the goggles can be used with all the flight features.

 

[Camino Ken]

I have the white goggles and I can confirm that only the two modes are available.

As to exiting, one easy way is to just toggle the mode switch.

 

[mintakax]

I have the white goggles and I can confirm that only the two modes are available.

As to exiting, one easy way is to just toggle the mode switch.

Great, thanks !