M3T - Pilot 2 for wind blades images with Waypoints

[JCDiaz]

Can a VERTICAL waypoint mission be done using Pilot 2 to inspect a turbine blade which is in a vertical position (12 o clock) and take images every x meters or y seconds?
Which are the main tips to do it? Clues?

 

[DJ Wes]

Can a VERTICAL waypoint mission be done using Pilot 2 to inspect a turbine blade which is in a vertical position (12 o clock) and take images every x meters or y seconds?
Which are the main tips to do it? Clues?

I have a Litchi mission planner for wind turbine inspections. It can be used to create a flight path along each blade based on the geometry of the wind turbine. The resulting Litchi mission CSV file can be converted to a DJI KMZ file for the M3T. Litchi has the ability to take photos at given intervals of distance or time. The photo interval function would have to be set up using DJI Flight Hub 2 after the mission is converted.

Here is the wind turbine mission creator:

Wind Turbine Inspection Mission Creator

Wes Barris

www.litchiutilities.com

 

[jaja6009]

Can a VERTICAL waypoint mission be done using Pilot 2 to inspect a turbine blade which is in a vertical position (12 o clock) and take images every x meters or y seconds?
Which are the main tips to do it? Clues?

What software are you processing in?

Agisoft Pro has a complex mission planner that does wonders.

DJ Wes, your Litchi solution looks pretty cool!

 

[JCDiaz]

I have a Litchi mission planner for wind turbine inspections. It can be used to create a flight path along each blade based on the geometry of the wind turbine. The resulting Litchi mission CSV file can be converted to a DJI KMZ file for the M3T. Litchi has the ability to take photos at given intervals of distance or time. The photo interval function would have to be set up using DJI Flight Hub 2 after the mission is converted.

Here is the wind turbine mission creator:

Wind Turbine Inspection Mission Creator

Wes Barris

www.litchiutilities.com

Something I´m doing is not ok. At the moment I try to import the .kmz file created by your mission planner to the RC (Pilot 2) a "Task Type Error" appears. (I´m choosing ALT for the Altitude mode).
Appreciate your comments and help.
Regards

 

[jaja6009]

It needs to be a kml file.

Upload into Google Earth and then resave as a kml.

 

[DJ Wes]

At the moment I try to import the .kmz file created by your mission planner to the RC (Pilot 2) a "Task Type Error" appears. (I´m chossing ALT for the Altitude mode).

I am not familiar with Pilot 2 and its requirements. All of my testing has been done in DJI Flight Hub 2:


And the import function:

It needs to be a kml file.

Upload into Google Earth and then resave as a kml.

Don't confuse a DJI KMZ file with a Google Earth KMZ file. While they are both compressed archives, they contain different information.

If you wish to uncompress a DJI KMZ file, simply use either "unzip", or change the extension to ".zip" and use the built-in Windows uncompress command. A DJI KMZ file will contain two files: template.kml and waylines.wpml.

 

[JCDiaz]

I´m getting to this point in Google Earth Pro after converting the csv to .kmz:


Then I save it as a .kml with Google Earth Pro. Try to import it as a "Waypoint Route" in Pilot 2 maintaining "Relative to TakeoffPoint (ALT)" and a "Task Type Error" appears:



Any ideas?

 

[DJ Wes]

I´m getting to this point in Google Earth Pro after converting the csv to .kmz:

Take Google Earth out of the equation. It plays no part in this process. A DJI KMZ file is different from a Google Earth KMZ file. DJI recklessly used Google's KMZ extension confusing some people.

Then I save it as a .kml with Google Earth Pro. Try to import it as a "Waypoint Route" in Pilot 2 maintaining "Relative to TakeoffPoint (ALT)" and a "Task Type Error" appears:

That will not work. You should be importing the KMZ file directly from my conversion program if Pilot 2 supports importing KMZ files. Again, I can't help you with Pilot 2's capabilities. I have only imported KMZ files into DJI's Flight Hub 2.

Are you sure Pilot 2 supports importing the DJI KMZ format?