Mavic 2 Dual Enterprise (Will Not Work With....)

[Marksnet]

Helllo all,

So I’ve been using Drone Deploy for mapping and roof reports.
All of a sudden it doesnt work anymore and DD says they do not support the Mavic 2 dual enterprise Drone yet.
However it worked for 3 months.

It gives a remote controller error.
I’ve toggled every item
I’ve change multiple flight mode on and off on the DJI pilot app for the drone
I’ve uninstalled all apps
I’ve powered down and back up.

So I figured maybe GS Pro from DJI would still work.
NOPE
DJI doesnt even support their own drone.

Error with DJI GS Pro
No camera recognized.

Can anyone recommend a software that will support my drone and allow me to fly by autopilot and a grid pattern that will allow me to generate roof reports like Drone Deploy used to do?

So bizarre!

 

[simsurf]

Pix4d is the other most common flight software available...

 

[Keule]

Pix4d is the other most common flight software available...

... and does not support the Enterprise Dual either.

 

[Keule]

So I figured maybe GS Pro from DJI would still work.
NOPE
DJI doesnt even support their own drone.

You must use GSPro 2.0.3
That version supports M2ED

 

[Marksnet]

You must use GSPro 2.0.3
That version supports M2ED

I’m sure trying to get it to work and I see no way even using custom camera settings. It just wont fly. Contacted DJI and they confirmed GS Pro still does not support Mavic 2 Dual Enterprise

 

[Keule]

Contacted DJI and they confirmed GS Pro still does not support Mavic 2 Dual Enterprise

Hmmm, that sounds irritating ...

Just came back with the M2ED and GSPro 2.0.3
It worked with a waypoint mission. i selected the Mavic Enterprise camera with 24 mm.

 

[Keule]

Contacted DJI and they confirmed GS Pro still does not support Mavic 2 Dual Enterprise

FYI

 

[Marksnet]

FYI
View attachment 67213

I hear ya.
I keep getting (no camera detected)
Can’t seem to find a support option to see if my settings are correct but, I would assume that they are based on multiple flight mode being selected.
Not much else to do

 

[Marksnet]

 

[Keule]

Your AC is not connected

 

[Marksnet]

Sorry was just showing what my error was. I didn’t have the drone active. I’ll get done today with work and give it a go again and snap an actual screenshot

 

[midgard-ai]

Hello,

I'm facing the same issue as you concerning the compatibilities of the ME2D and flight planning apps and it's really annoying! Did you figure out the best solution ?

Thank you very much !

 

[RCdancer]

FYI
View attachment 67213

Interesting. I need to download it and try it with my M2ED. thanks,

 

[RCdancer]

Preliminary testing of GS Pro 2 with the M2ED indoors. Connects to the M2ED recognizes it as a Dual. Can access the visible camera but not the thermal camera nor the mounted accessory. While I can seamlessly switch back and forth (without shutting down the drone or controller) from GS Pro 2 to the Pilot app to access the thermal camera and accessories, I'm not sure how well that would work inflight in the middle of a mission. I will test it later outdoors. I do like the ease of setting up missions with GS Pro 2.