Hello,
After searching half the internet I'll try it here.
I have a DJI mavic air 2 with multiple errors (see error codes below).
I have already exchanged the GPS unit and the IMU, but the same errors always occur.
I checked all the cable connections so there are no loose cables.
I'm beginning to suspect something is wrong with the motherboard.
Can someone help me there?
flight checklist
Gimbal not recognized. repairs necessary. Please contact DJI Support.(Code: 40012)
Gyroscope initialization failed. Restart aircraft. (Code: 30045)
Barometer initialization failed. Restart aircraft. (Code: 30047)
IMU calibration required. Please calibrate. (Code: 30050)
Low GPS accuracy. Please fly carefully. (Code: 30049)Start not possible
No GPS signal. Stable hovering not possible. Please fly carefully.(Code: 30007)
After searching half the internet I'll try it here.
I have a DJI mavic air 2 with multiple errors (see error codes below).
I have already exchanged the GPS unit and the IMU, but the same errors always occur.
I checked all the cable connections so there are no loose cables.
I'm beginning to suspect something is wrong with the motherboard.
Can someone help me there?
flight checklist
Gimbal not recognized. repairs necessary. Please contact DJI Support.(Code: 40012)
Gyroscope initialization failed. Restart aircraft. (Code: 30045)
Barometer initialization failed. Restart aircraft. (Code: 30047)
IMU calibration required. Please calibrate. (Code: 30050)
Low GPS accuracy. Please fly carefully. (Code: 30049)Start not possible
No GPS signal. Stable hovering not possible. Please fly carefully.(Code: 30007)