Mavic air 2 skin template

[Mike.pham]

I just create my own cut file for air 2. Feeling free to use, good luck

 

[franco74]

I just create my own cut file for air 2. Feeling free to use, good luck

Thank you!

 

[mmamonster]

Thank you

 

[swetzel]

I just create my own cut file for air 2. Feeling free to use, good luck

As a pdf is the size accurate or do I need to adjust anything?

 

[Fran-Justel]

Thanks!!! Goog Work

 

[fromheaven]

This is a bit off.

 

[wali]

This is a bit off.

I had to reset my printer to 100% and I got a good fit.

 

[wali]

Thanks MikePham!

 

[SmudgeKJ]

I just create my own cut file for air 2. Feeling free to use, good luck

Would you mind if I use this myself too please?

 

[santiagob20]

Hey man Thanks! It's very helpful for me

 

[Heretik]

Thanks for your contribution.

 

[evenway]

thank you guys but i don't know how i start design through this template ? do you have tutorial on youtube how to desing on illustrator

 

[WrapWerks]

I just create my own cut file for air 2. Feeling free to use, good luck

Thanks.

 

[BirdzEyeView2020]

I just create my own cut file for air 2. Feeling free to use, good luck

Thank you!

 

[Chuckd610]

I just create my own cut file for air 2. Feeling free to use, good luck

How close to the edges of the MA2 are your template pieces? Most wraps/decals show too much gray.

 

[Chuckd610]

I'm about ready to take it apart and hydro dip it. Definitely won't be any gray showing after that.

 

[BirdzEyeView2020]

thank you guys but i don't know how i start design through this template ? do you have tutorial on youtube how to desing on illustrator

I'm quite sure there are better ways to do what I'm going to do...but...with my shallow computer expertise, I'm fine with it and don't mind the extra work. I have a friend that makes decals, so I will have him make 3 big squares, of whatever design I choose, using weather resistant decal material. I will then print out the actual size templates from @Mike.pham, carefully cut the shapes out and put them on top of my decal squares and trace them out with an exacto knife. A bit of a process, but as I said, I don't mind the little bit of extra work. Hope this helps in some way.

 

[elixnoir]

Acabo de crear mi propio archivo de corte para aire 2. Siéntete libre de usar, buena suerte

metro gracias

 

[abidfahim]

I just create my own cut file for air 2. Feeling free to use, good luck

you have Ai files?

 

[britdub]

I just create my own cut file for air 2. Feeling free to use, good luck

Thank you just what I was looking for, I can't download it on my phone I'll try again when I get home [emoji106]