Mavic lens removal

[Former Member]

Anyone know if the lens is removable on the Mav? I tried to turn it off with a pliers and ended up scraping it. The P3 was not easy to get off but screwed off if you did it the right way.

 

[Slayerstwin]

Did you try to take off that gold ring?

Sent from my XT1585 using MavicPilots mobile app

 

[Former Member]

Did you try to take off that gold ring?

Sent from my XT1585 using MavicPilots mobile app

I did, but coudlnt figure out how to get it off. It has 2 small holes 180 degrees apart from eachother.

 

[LuvMyTJ]

That looks like it is one piece. I would bet the lens assembly is pushed in from the rear or front. Try a small suction cup on the lens to see if it is threaded. Most likely its glued together. Probably a throw away part. The gold ring looks like it is purely cosmetic.

 

[Former Member]

That looks like it is one piece. I would bet the lens assembly is pushed in from the rear or front. Try a small suction cup on the lens to see if it is threaded. Most likely its glued together. Probably a throw away part. The gold ring looks like it is purely cosmetic.

I think youre right. There dont seem to be any screws inside the cam housing. I tried suctioning it and pulling and turning but it wouldnt budge. So I think the lens, cam housing, and cam circuit board are all glued as one piece.

 

[Chase R]

That looks like it is one piece. I would bet the lens assembly is pushed in from the rear or front. Try a small suction cup on the lens to see if it is threaded. Most likely its glued together. Probably a throw away part. The gold ring looks like it is purely cosmetic.

Looks like it has a lip in the front to hold the glass and is pressed in from the rear.

 

[Former Member]

Looks like it has a lip in the front to hold the glass and is pressed in from the rear.

Maybe so, but I didnt see any way to get the sensor board out.

Looks like it has a lip in the front to hold the glass and is pressed in from the rear.

Yep but I cant see a way to get the sensor board out, so for me, its one entire module. Maybe look at it under a microscope tomorrow.

 

[Slayerstwin]

Please post what you find you have me very interested now.. thanks a lot [emoji12]


Sent from my iPad using MavicPilots

 

[sendchad]

I have the same issue, water in my lens and DJI are such useless douche bags. Ive spent $20k with them in 3 months and they wont give me that part they say is $101 on their site. If you figure out how to open or remove the lens please let me know. I cannot get water droplet moisture out. Tried EVERYTHING, plus I feel dji should give me a new one free but they wont even let me pay for it. My plan now is to find a way to remove lens then cover with a UV filter or ND fileter (ie completely remove the glass) you never know, it might prevent lens flares and actually work better!

If anyone knows where to buy these lenses of how to open or remove the camera lens please let us know!

 

[Former Member]

Good luck.

 

[sendchad]

Good luck.

if you manage to source what i want please let me know

 

[Former Member]

if you manage to source what i want please let me know

Sent you a conversation.

 

[Tajino]

Did you managed to remove the front glass element of the camera module?
I found this youtube video, someone in Indonesia remove it by heating the adhesive and peel the glass off.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies