MAvic Mini Max Power Load Reached video

[sli-woody]

Hi Guys so I encountered this warning and found the problem, if anyone else is getting this warning this video I made may help you out:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[DanMan32]

Prop warp makes a lot of sense.
I have the FM case, and always align the props horizontally before storing without any rubber bands holding them down.

Even with the M2, for concern of prop warp, I remove the props before storing the AC in the FM bag.

 

[raymacke]

I have wondered about this myself as the Fly More case makes it easy to misalign the props. I have a 3d printed clip that holds the props in the proper position when stored and I have had no problems with the Max Power Syndrome.

It would be interesting to see how many of the pilots that have suffered this problem also use the Fly More case.

 

[mavicn00b]

I get the max power warning on occasion, but thats typical when its fighting a headwind. Props are stored carefully in the FMC case but also have this 3D printed "thing" which can assist with storing the props correctly.

Mavic Mini 1/2 Propeller Protector by Gerd_S

Tired about the Mavic Mini or Mini 2 propellers dangling around and fearing they could be bended or broken during transport?These straps will secure them.UPDATE FROM 20-02-23:Reduced version 3 from 3 to 2 layers to get it more flexible, also changed an angle to make unlocking more easy.UPDATE...

www.thingiverse.com

Its pretty basic but does the job with minimal filament used.

There are others:

Search Thingiverse - Thingiverse

Search and download free 3D printable objects for your projects, from prototypes to home improvements.

www.thingiverse.com

 

[whatthe2]

I get the max power warning on occasion, but thats typical when its fighting a headwind. Props are stored carefully in the FMC case but also have this 3D printed "thing" which can assist with storing the props correctly.

Mavic Mini 1/2 Propeller Protector by Gerd_S

Tired about the Mavic Mini or Mini 2 propellers dangling around and fearing they could be bended or broken during transport?These straps will secure them.UPDATE FROM 20-02-23:Reduced version 3 from 3 to 2 layers to get it more flexible, also changed an angle to make unlocking more easy.UPDATE...

www.thingiverse.com

Its pretty basic but does the job with minimal filament used.

There are others:

Search Thingiverse - Thingiverse

Search and download free 3D printable objects for your projects, from prototypes to home improvements.

www.thingiverse.com

Very cool. Nice work.

 

[sli-woody]

I get the max power warning on occasion, but thats typical when its fighting a headwind. Props are stored carefully in the FMC case but also have this 3D printed "thing" which can assist with storing the props correctly.

Mavic Mini 1/2 Propeller Protector by Gerd_S

Tired about the Mavic Mini or Mini 2 propellers dangling around and fearing they could be bended or broken during transport?These straps will secure them.UPDATE FROM 20-02-23:Reduced version 3 from 3 to 2 layers to get it more flexible, also changed an angle to make unlocking more easy.UPDATE...

www.thingiverse.com

Its pretty basic but does the job with minimal filament used.

There are others:

Search Thingiverse - Thingiverse

Search and download free 3D printable objects for your projects, from prototypes to home improvements.

www.thingiverse.com

Wow some great ideas to keep them props together!

 

[raymacke]

The problem appears to be with the rear props which are the ones stored on the bottom of the Mini. With the Fly More case, the solutions are more limited as many holder designs won't fit. There is a wider version of one shown in an above link but I found it too stiff and hard to remove. I was concerned the gimbal cover would be damaged in the process. This is the one that works for me.

Mavic Mini Wing Holder Clips by Hoolyhoo