I recently clipped some tree branches at speed which sent my Mavic Pro into the ground. I broke the middle frame, bent the gimbal and broke the mounting plate. I bought a gimbal with a ribbon already attached a new middle frame, PTZ cable and gimbal mount. I swapped everything over and powered it up. Had some calibrations that needed to be done but the camera is now black. The gimbal works as it should and it flies fine, but I have no image. When I press record for a video it sometimes starts, most of the time does not. I am not able to take a picture. I did get one 2 second long black video. I reset all the camera settings to no avail. The AF box flashes on the screen if that means anything. Could I have gotten a bad PTZ cable? The camera board looked just fine as did all the other cables that I didn't replace.