Mavic Pro Fishing Release Mechanism from Dronefishing.com

[Downunder]

Just got the first batch of fishing line release mechanisms from Dronefishing.com

It comes with the release mechanism with LED housing to clamp around the front arm, 2 rubber fitting clamps (1 spare), charging cable and real leg extension.

Going to give it a try this weekend. The plastic housing is a strange material. Very rough plastic (Does not look 3D printed)

Powered from an internal LIPO battery.

To release the bait you program your C1 controller button to turn the front Mavic LED's nav lights on and off and the sensor on the end of the arm moves a servo in the housing to release the bait.

Weighs less than 50g

 

[Ziggy01]

Fishing line.
Propellers.
What could possibly go wrong?

 

[Rnl]

Get some video of you baiting it and of the drop if you can please.

 

[Boog0822]

Like $160 isn't it? Too much...

 

[Downunder]

I'll do a video the weekend. I'll make a drop line to keep the main line and bait away from the props as recommended. I've got refresh cover so she'll be good. Worst comes to worst DJI are still making Mavics right?

 

[Downunder]

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Done plenty of drone fishing before. Here's my phantom 3 pro in action.

 

[SlackBladder]

Fishing line.
Propellers.
What could possibly go wrong?

you forgot WATER!!

 

[Ziggy01]

you forgot WATER!!

Right...just add water.

 

[SweeT]

Two cheaper methods

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[longhair]

Just got the first batch of fishing line release mechanisms from Dronefishing.com

It comes with the release mechanism with LED housing to clamp around the front arm, 2 rubber fitting clamps (1 spare), charging cable and real leg extension.

Going to give it a try this weekend. The plastic housing is a strange material. Very rough plastic (Does not look 3D printed)

Powered from an internal LIPO battery.

To release the bait you program your C1 controller button to turn the front Mavic LED's nav lights on and off and the sensor on the end of the arm moves a servo in the housing to release the bait.

Weighs less than 50g

View attachment 12595 View attachment 12596 View attachment 12597 View attachment 12598 View attachment 12599 View attachment 12610 View attachment 12611

I WOULD TRY ONE IF IT WERE LESS EXPENSIVE

 

[dmanisgnarly]

I bought a 3 pack of adjustable tension planing clips for $9. I utilize the rear hooks or the landing gear.

 

[Lapeer20m]

I have one and think it’s fantastic. The fit and finish on mine is excellent. I’ve been testing the concept of flying a rescue rope + floatation device to rescue victims who have fallen through the ice.

Mavic will fly pulling hundreds of feet of 1,500 lb test rope and a floatation device, even in high winds.

The gannet bait release has worked for me 100% of the time.