Hello friends, I need a solution. my mavic pro does not run the RTH, currently my maximum altitude is 100 meters, and the RTH altitude is 50 meters.
When I execute the RTH, the drone starts the RTH, turns in front of the Home-point, starts to climb, gives a small stop at the RTH altitude (50m) but continues to climb until reaching the maximum altitude of 100 meters. then it stops, does not return, and the RC informs the RTH normally, even with beep.
(conditions: gps OK, home-point OK, RTH OK settings, OK telemetry)
Several cell phones, app versions and different firmware were tested
When I execute the RTH, the drone starts the RTH, turns in front of the Home-point, starts to climb, gives a small stop at the RTH altitude (50m) but continues to climb until reaching the maximum altitude of 100 meters. then it stops, does not return, and the RC informs the RTH normally, even with beep.
(conditions: gps OK, home-point OK, RTH OK settings, OK telemetry)
Several cell phones, app versions and different firmware were tested