hookalakupua
Well-Known Member
- Joined
- Apr 23, 2017
- Messages
- 304
- Reactions
- 100
That is frickin' awesome!!!Did this a while ago 1080P 30fps - True color - +1 0 0 Not sure if Youtube compresses vid etc but original footage is really quite spectacular
That is frickin' awesome!!!Did this a while ago 1080P 30fps - True color - +1 0 0 Not sure if Youtube compresses vid etc but original footage is really quite spectacular
Well done! I'm gonna have to try those settings tomorrow. ThanksJust for the **** of it here is one of my first attempts for comparison, do you see any of the same negative affects you are mentioning?
This was shot with no filters at around mid day in D-Cinelog at 4k 24fps and +1 0 0 and PAL. Only thing done to it in post production was clip out sections and export at 1080 24fps. I am no photographer but I was pretty happy with the results playing on a large screen. Is there something in there not right I could work on?
You haven't set it right then.Thanks, yes I am comparing it to any newer DSLR video quality. Unfortunately it is just miles of difference. I could never deliver this kind of quality to a client. It's sad, since the form factor is so perfect.
Rubbish! Nfsc or PAL should make no difference.What else could be happening is you maybe filming on ntsc which is essentially using the same compression setting per second that's spread over an extra 5 frames. This could most certainly in theory cause ghosting. Try work with pal and let us know
Did this a while ago 1080P 30fps - True color - +1 0 0 Not sure if Youtube compresses vid etc but original footage is really quite spectacular
Sheesh. Enough with the demands already.You haven't set it right then.
Make sure you set sharpness to plus 1 and ALWAYS shoot in 4K to maximize resolution!
Never shoot in HD!
Rubbish! Nfsc or PAL should make no difference.
North America and Japan use NTSC and no complaints!
Look, I am not an expert, but I use my gear professionally every single day. I love the format/portability of the Mavic, but the image quality in video simply SUCKS!
I have tried tons of different settings/firmware/apps etc. The image quality either shows really bad sharpening halos with aliasing and artifacts and the image breaks up because the codec can't handle the detail. I really wish there was a solution to getting better image quality from it, but I just don't see how. All I keep reading is how everyone is so happy with this thing. How can that be?
(from the other side of the coin)
I did not do anything special, just shoot in 2.7k and process it in fcpx (just basic color correction, no LUTs) and output masterfile into 2.7k, thats it, youtube seems kill quality little bit as usualVery usable! There is still aliasing, but it is very minimal. How did you post process it to minimize the aliasing? I noticed that you didn't post in 2k or 4k.
You're just straight up a troll. "I'm not an expert, but use my gear professionally every single day". If you are anywhere close to a professional then it would be obvious the setup of a Mavic or any consumer grade drone camera is just that, consumer grade. You aren't filming that Oscar scene with a Mavic. Move along
This thread is worthless without samples.
We use essential cookies to make this site work, and optional cookies to enhance your experience.