Mini 5 Pro & RC Pro 2 case

[PAW]

Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks

 

[GadgetGuy]

Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks

Nobody makes one yet, but the RC Pro 2 will still fit in the original bag.

 

[PAW]

Nobody makes one yet, but the RC Pro 2 will still fit in the original bag.
View attachment 185688

Thanks. Tight, but I'll give it a try.

 

[GadgetGuy]

Thanks. Tight, but I'll give it a try.

Yes, it is tight. The key is not putting anything in the top zippered compartment to retain its flexibility to stretch over the top. Be careful with the zippers, but it will zipper and unzipper while on the shoulder strap around your neck, folding the top out away from yourself for easy access. Use the compartment on the right for props and filters and cables.

It will also fit on its side in the middle, but then the pressure is against the side of the RC Pro 2, and the top is stretched over it, bulging up. Since the RC Pro 2 costs as much as the whole kit, best not to risk damage should the top bump anything. Hence, laying it across and level, making the bag a little wider in the middle, is better.

 

[jeff Voigt]

Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks

Here you go. I just ordered this one for my Mini 5 Pro and RC Pro 2 Controller.

 

[GadgetGuy]

View attachment 185709Here you go. I just ordered this one for my Mini 5 Pro and RC Pro 2 Controller.

Got a link to go with the screenshot?

 

[PAW]

Got a link to go with the screenshot?

Ditto... looks good

 

[jeff Voigt]

Got a link to go with the screenshot?

Sorry about that. This is a screenshot from Amazon. Search Amazon. You’ll find the hard case there.

 

[PAW]

Amazon.com : Honlyn Waterproof Case for DJI Mini 5 Pro, Storage Bag Portable Handbag Box Carrying Travel for RC Pro 2/RC 2 Controller Accessories : Electronics

 

[Dronecation]

Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks

Try here:

Amazear & FPVtoSky

Amazear

www.amazear.com

 

[GadgetGuy]

Try here:

Amazear & FPVtoSky

Amazear

www.amazear.com

Unfortunately, none for the RC Pro 2 and the Mini 5 Pro.

 

[Dronecation]

Unfortunately, none for the RC Pro 2 and the Mini 5 Pro.

Comes up for me...screen capture here:

 

[GadgetGuy]

Comes up for me...screen capture here:
View attachment 185721

Sorry, but that case is only for the RC 2, which not the same as the larger RC Pro 2 that comes with the Mavic 4 Pro Crestor Combo, which is the one the OP has asked about.

 

[Dronecation]

Sorry, but that case is only for the RC 2, which not the same as the larger RC Pro 2 that comes with the Mavic 4 Pro Crestor Combo, which is the one the OP has asked about.

When you go to the link, it shows a variety of cases. But it seems to change because the one I ordered in Sept has now been taken off.
I posted the image of the one I ordered as an example of what they had in stock at the time.
Sorry...my bad.

 

[GadgetGuy]

When you go to the link, it shows a variety of cases. But it seems to change because the one I ordered in Sept has now been taken off.
I posted the image of the one I ordered as an example of what they had in stock at the time.
Sorry...my bad.

The RC Pro 2 and the Mini 5 Pro is a very rare unsold combination, requiring ownership of the Mavic 4 Pro Creator Combo, which is why most won't carry it or make it. Very little demand.

 

[GadgetGuy]

View attachment 185788

Sorry, but that is also the RC 2, and not the RC Pro 2 controller.

 

[skycam509]

I happened to have this Gator Cases case for a Behringer xAir 18 audio mixer. I used some extra separators I had around from a camera bag and put this together for my Mini 4 Pro and RC Pro 2 controller. If the Mini 5 Pro is any longer than the Mini 4 Pro, there might not be enough room for it to stand on end like this.

 

[Ken Schmidt]

Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks

I'm still in the Hunt for one? Both LYKUS and StartRC have said they are producing one. But not available yet. Ive even tossed around the Idea of the LYKUS PVC1 with dividers.