DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

Mini 5 Pro & RC Pro 2 case

PAW

Well-Known Member
Premium Pilot
Joined
Apr 25, 2019
Messages
757
Reactions
655
Age
71
Location
NorCal & SouOre
Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks
 
  • Like
Reactions: Ken Schmidt
Thanks. Tight, but I'll give it a try.
Yes, it is tight. The key is not putting anything in the top zippered compartment to retain its flexibility to stretch over the top. Be careful with the zippers, but it will zipper and unzipper while on the shoulder strap around your neck, folding the top out away from yourself for easy access. Use the compartment on the right for props and filters and cables.

It will also fit on its side in the middle, but then the pressure is against the side of the RC Pro 2, and the top is stretched over it, bulging up. Since the RC Pro 2 costs as much as the whole kit, best not to risk damage should the top bump anything. Hence, laying it across and level, making the bag a little wider in the middle, is better.
 
  • Like
Reactions: PAW
Sorry, but that case is only for the RC 2, which not the same as the larger RC Pro 2 that comes with the Mavic 4 Pro Crestor Combo, which is the one the OP has asked about.
When you go to the link, it shows a variety of cases. But it seems to change because the one I ordered in Sept has now been taken off.
I posted the image of the one I ordered as an example of what they had in stock at the time.
Sorry...my bad.
 
When you go to the link, it shows a variety of cases. But it seems to change because the one I ordered in Sept has now been taken off.
I posted the image of the one I ordered as an example of what they had in stock at the time.
Sorry...my bad.
The RC Pro 2 and the Mini 5 Pro is a very rare unsold combination, requiring ownership of the Mavic 4 Pro Creator Combo, which is why most won't carry it or make it. Very little demand.
 
  • Like
Reactions: Dronecation
I happened to have this Gator Cases case for a Behringer xAir 18 audio mixer. I used some extra separators I had around from a camera bag and put this together for my Mini 4 Pro and RC Pro 2 controller. If the Mini 5 Pro is any longer than the Mini 4 Pro, there might not be enough room for it to stand on end like this.
 

Attachments

  • 20250924_152321.jpg
    20250924_152321.jpg
    1.8 MB · Views: 8
  • Like
Reactions: PAW and GadgetGuy
Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks
I'm still in the Hunt for one? Both LYKUS and StartRC have said they are producing one. But not available yet. Ive even tossed around the Idea of the LYKUS PVC1 with dividers.
 
Any info on soft and/or hard cases for the min5pro/RC Pro 2? Having trouble locating one.
Thanks
While I haven't found any cases yet specifically made for the Mini Pro 5 and the RC PRO 2. I did order a case from Amazon called Lekufee with adjustable section. I was able to get the M5P and the RC PRO 2 and even had room for my M4P in thrre1000009882.jpg1000009884.jpg
 
  • Like
Reactions: GadgetGuy

DJI Drone Deals

New Threads

Forum statistics

Threads
138,954
Messages
1,642,957
Members
167,286
Latest member
marcelo21
Want to Remove this Ad? Simply login or create a free account