If you’re not connected to the internet when you fly, you may not see it.
That‘s what mine did. I turned off airplane mode to deal with some mapping and it popped up.
What kind of issues are they having?I was reading, on the mavic mini Facebook page, about people having issues after updating their battery firmware.
I'll connect at home with WiFi and see if anything comes up. I was reading, on the mavic mini Facebook page, about people having issues after updating their battery firmware. I can't get 29mph on sport mode with mine. The best I ever got was 25mph with the wind but it's quite cold here.
I updated mine but the update didn't come up for the other 2 batteries when I put them in the drone. I haven't flown it yet to see if it will make any difference. Not really sure what the update is for.I was flying my MM this past Saturday. All was going well. I did a RTH and it landed on the edge of my launch pad. I thought that was awesome, only a foot away from the center, the takeoff point. Then, I was ready for my second flight. I had a message saying I had a to update the battery firmware! OK, that took about one minute or so. Restarted and off again for my second flight. I heard the update... Home point has been updated, at takeoff. The next three attempts to return to home were by pushing RTH. Two times by the controller and once by the screen. Each time the MM just wanted to land from its current position. So I had to fly it back to its home point each time.
I just updated one battery of the three I have.
Has anyone else had any problems after updating the battery firmware on the new Mavic Mini?
If you less than 20m from home point it will just land.I was flying my MM this past Saturday. All was going well. I did a RTH and it landed on the edge of my launch pad. I thought that was awesome, only a foot away from the center, the takeoff point. Then, I was ready for my second flight. I had a message saying I had a to update the battery firmware! OK, that took about one minute or so. Restarted and off again for my second flight. I heard the update... Home point has been updated, at takeoff. The next three attempts to return to home were by pushing RTH. Two times by the controller and once by the screen. Each time the MM just wanted to land from its current position. So I had to fly it back to its home point each time.
I just updated one battery of the three I have.
Has anyone else had any problems after updating the battery firmware on the new Mavic Mini?
If you less than 20m from home point it will just land.
I have the same problem too. I updated the app and firmware to 1.0.4. Then i was able to update 2 of my batteries as well. But there's no prompt to update the 3rd battery. I turned off airplane mode and tried to relaunch and restart the drone multiple times alreadyMy 1st and 2nd battery prompted updates after AC update, the 3rd battery never prompt, others have also had this experience.
I already figured it out. When i updated the firmware and app to 1.0.4, the battery that i used was updated at the same time. That's the reason why there is no prompt to update the 3rd battery that i've gotNeither of the other two batteries prompted me for an update after updating to 0.0400 and app 1.0.4