Need help

[Gustty]

I have a new mavic and optical sensors don't work... Anyone can help me

Sent from my E6653 using MavicPilots mobile app

 

[SoapyGolem]

What do you mean just doesnt work? like they dont detect anything?

 

[Gustty]

Yes I tried to enable avoiding sensors and nothing works

Sent from my E6653 using MavicPilots mobile app

 

[Gustty]

No landing protection no nothing

Sent from my E6653 using MavicPilots mobile app

 

[SoapyGolem]

So what does it do when you try landing does it hover for a second or just coming straight down?

 

[Gustty]

Going straight down

Sent from my E6653 using MavicPilots mobile app

 

[Gustty]

And in the app it shows that all sensors are enabled

Sent from my E6653 using MavicPilots mobile app

 

[Gustty]

I already bumped to the ground and a wall (

Sent from my E6653 using MavicPilots mobile app

 

[Gustty]

And also it doesn't stand still...moves all directions

Sent from my E6653 using MavicPilots mobile app

 

[SoapyGolem]

You need to recalibrate the IMU, and then in a open area with no medal...... like a field.... recalibrate the compass as well. try that, if sensors still don't work something is majorly wrong and may need to be send it for repair.

 

[Gustty]

I tried and is the same

Sent from my E6653 using MavicPilots mobile app

 

[Gustty]

I will try now to use a different phone

Sent from my E6653 using MavicPilots mobile app

 

[Gustty]

Same thing sensors don't work ...what I should try next?

Sent from my E6653 using MavicPilots mobile app

 

[msinger]

Where are you flying? Is there sufficient light? The sensors will be automatically disabled when they cannot be used due to poor lighting conditions.

 

[Gustty]

Outside midday. I tried calibrating the sensors with dji assistant and it won't let me it keeps asking me to reboot aircraft when I am in tutorial and I am not able to calibrate

Sent from my E6653 using MavicPilots mobile app

 

[klangford]

Outside midday. I tried calibrating the sensors with dji assistant and it won't let me it keeps asking me to reboot aircraft when I am in tutorial and I am not able to calibrate

Sent from my E6653 using MavicPilots mobile app

Silly question but did you confirm all blades are properly installed and seated?


Sent from my iPhone using MavicPilots

 

[Gustty]

Yes it flays only the avoiding sistem in the app is enabled but don't work is like he is off

Sent from my E6653 using MavicPilots mobile app