
NTSB Investigating Drone Pilot Injury
The NTSB says the pilot of a DJI Matrice drone suffered a serious hand injury after tangling with the uncooperative aircraft near Young Harris, Georgia, on May 6. According to...

?This guy sounds like he would probably get hurt by a toaster.
TRUE , however the INJURY should have never happened .Did you guys read the article? He wasn’t in the restricted zone when this happened per the article. This drone has RTK reception, it is capable of centimeter level GPS precision. He flew the drone away from the jail when it became unresponsive. Refusing commands to land is not typical restricted zone behavior. Becoming unresponsive to control stick input but allowing RTH is not restricted zone behavior. The drone clearly went haywire and I blame DJI for having software that takes the control out of the pilots hands.
Sound all the alarms and prevent takeoff in restricted zones but do not take away control from the pilot. Nobody would drive a car that could suddenly prevent the driver from controlling the vehicle.
This is a $30,000-$45,000 drone btw. This shouldn’t have happened.
I think it’s easy to look in hind sight and say what he should have done and not have done but we weren’t there and don’t know what he was experiencing. The props are inverted and underslung on the M300. I’m not sure it was such a terrible idea to try to pop the batteries if you didn’t know what happened to him. Not a ton of other options. This drone was clearly going haywire so who knows what it would do next, I’d probably rather it be me than a bystander.
the pilot was demonstrating the drone to a prospective customer but the aircraft wouldn’t respond correctly to control inputs. He hit the “return to home” feature and the drone settled into a hover at about seven feet above a vehicle in the parking lot where the demonstration took place. When the drone refused to budge and ignored a command to land, the pilot gave his customer the remote and tried to move the drone manually by grabbing the landing gear. The drone resisted and headed back to its holding position. When he tried to take the batteries out of the still-hovering drone he was hit by one of the propellers and suffered tendon and nerve damage in one hand. It wasn’t until he discussed the incident with an NTSB investigator that he learned what had caused the drone’s obstinance.I think it’s easy to look in hind sight and say what he should have done and not have done but we weren’t there and don’t know what he was experiencing. The props are inverted and underslung on the M300. I’m not sure it was such a terrible idea to try to pop the batteries if you didn’t know what happened to him. Not a ton of other options. This drone was clearly going haywire so who knows what it would do next, I’d probably rather it be me than a bystander.
Only other thing I can think of is to try and flip it but could be the M300 is too powerful for that
Sounds like he couldn’t get it to come down either. He tried doing the same thing you did but the M300 requires both hands to catch. He gave the remote to the client so he could hand catch while the other person tried to stop the motors which didn’t work. He tried pulling it away from the car so it wouldn’t land on the car. That didn’t work either.the pilot was demonstrating the drone to a prospective customer but the aircraft wouldn’t respond correctly to control inputs. He hit the “return to home” feature and the drone settled into a hover at about seven feet above a vehicle in the parking lot where the demonstration took place. When the drone refused to budge and ignored a command to land, the pilot gave his customer the remote and tried to move the drone manually by grabbing the landing gear. The drone resisted and headed back to its holding position. When he tried to take the batteries out of the still-hovering drone he was hit by one of the propellers and suffered tendon and nerve damage in one hand. It wasn’t until he discussed the incident with an NTSB investigator that he learned what had caused the drone’s obstinance.
Its Panic : We have all had drones exhibit the same behavior when in the Geo Zone, , i have a ton of video showing how that happens . Let alone taking off from a Parking Lot surrounded by Cars. Not the best move.
Notice how the Phantom will not move forward or backward , but only up and down. IN THE GEO ZONE
Also notice how it gets stopped going forward.
Question. Just asking. Why do you think he reported himself to the authorities? I doubt the ER doctors did. It's not in their purview to do so.So, in the air space research, he saw nothing. The Pilot in Command didn't check with Aloft, Be4ufly, or Airman before takeoff. He did not deserve the injury, no one does, but Darwin would be pleased. What a failure of checklist, situational awareness and preparation. It is this (deleted by moderator) that has caused many restrictions.![]()
NTSB Investigating Drone Pilot Injury
The NTSB says the pilot of a DJI Matrice drone suffered a serious hand injury after tangling with the uncooperative aircraft near Young Harris, Georgia, on May 6. According to...www.avweb.com
The NTSB regulation CFR 830 requires that the operator of an aircraft provide notification of any “accident” and certain “incidents” to the NTSB immediately. An accident is where (1) a person on board suffers serious injury or loss of life or (2) where the aircraft suffers substantial damage.Question. Just asking. Why do you think he reported himself to the authorities? I doubt the ER doctors did. It's not in their purview to do so.
We use essential cookies to make this site work, and optional cookies to enhance your experience.