- Joined
- Apr 10, 2017
- Messages
- 238
- Reactions
- 265
I’ve been having an issu with my Mavic abruptly slamming on the brakes as if it detects an obstacle that’s not there. Yesterday it stopped and would not let me move in any direction as if something was 2 ft in front of it. All I could do was rotate 360 deg. I was getting rather frustrated to the point of think it was just going to Hover, drain the battery and then drop from the sky. I even tried to hit the RTH function and it still would not move. After a couple of minutes it finally let me take control. I flew around for a minute and once again it thought something was right in front of it.
The 1st time this happened...a couple of months ago, I cleaned the sensors with a Q tip and a bit of rubbing alcohol. Didn’t have the issue for a couple of weeks and it happened again, but only once. Yesterday was different though, to the point of me believing my Mavic has either a Hardware or Firmware issue. Any of you guys experience anything close to my issues?
The 1st time this happened...a couple of months ago, I cleaned the sensors with a Q tip and a bit of rubbing alcohol. Didn’t have the issue for a couple of weeks and it happened again, but only once. Yesterday was different though, to the point of me believing my Mavic has either a Hardware or Firmware issue. Any of you guys experience anything close to my issues?