- Joined
- Dec 25, 2017
- Messages
- 17
- Reactions
- 3
- Age
- 56
Flying and adjusting a waypoint route. First four times, worked fine, came in about a meter under a branch. Fifth time, came in about a meter high. Why did I not stop when I saw that? Pilot error. Thought it would interpolate height down to the next waypoint. When Litchi saw that the MP was heading for a branch, it stopped about a meter out. But then it started forward every second or so in 20-30cm nudges. I was slow to hit the pause, and by the time I did, the MP was in the tree. Fell 10', lost a leg, maybe a gimbal.
So...
(1) Yes, of course, then fundamental responsibility is mine. When I saw the MP coming in high, I should have stopped the flight and gone and read up on GPS/INS accuracy. What's a good rule of thumb for how much clearance to observe in wayponit flying?
(2) Litchi CA seems shakier than DJI Go. I had extensively tested DJI Go, and it really didn't want the GP to hit things. Vs the Litchi, which seemed to be playing chicken w/ the tree. I should mention that there was no wind so the branch was stationary. Is there any way to make Litchi CA smarter? There don't seem to be any settings, other than Collision Avoidance On/Off (it was on) and Active Collision Avoidance On/Off (it was off).
So...
(1) Yes, of course, then fundamental responsibility is mine. When I saw the MP coming in high, I should have stopped the flight and gone and read up on GPS/INS accuracy. What's a good rule of thumb for how much clearance to observe in wayponit flying?
(2) Litchi CA seems shakier than DJI Go. I had extensively tested DJI Go, and it really didn't want the GP to hit things. Vs the Litchi, which seemed to be playing chicken w/ the tree. I should mention that there was no wind so the branch was stationary. Is there any way to make Litchi CA smarter? There don't seem to be any settings, other than Collision Avoidance On/Off (it was on) and Active Collision Avoidance On/Off (it was off).