Pressed Return To Home But Mavic Started Autolanding

[Pittsburgh Bill]

Yesterday I selected 'Return To Home' but my Mavic started 'Auto Landing' over water.

• At 1 second into the flight the home point was recorded.
• At 1:52 I selected 'Return To Home' but the log shows 'Mode Changed To Autolanding'.
• At 1:52 I received 'Tips Landing'
• The Mavic got to -4.8 feet (the waterline is below my homepoint)
• I applied throttle at got the Mavic to a safe altitude (179 feet)
• At 2:48 I selected 'Go Home'
• At 2:48 I received the tip 'Aircraft is return to the home point'.
• At 4:34 the Mavic landed on the landing pad.

Here is a link to the log:

Airdata UAV - Flight Data Analysis for Drones

Can anyone shed some light as to what happened ?

Screenshot of messages from the log:

 

[msinger]

Please upload your TXT flight log here and post a link back here. You'll find instructions for locating your TXT flight log at that link.

 

[Pittsburgh Bill]

Please upload your TXT flight log here and post a link back here. You'll find instructions for locating your TXT flight log at that link.

Here is the link:

DJI Phantom & Mavic Flight Log Viewer - PhantomHelp.com

 

[msinger]

Your flight log is showing you tapped the auto land icon (instead of RTH) on the left side of DJI GO.

 

[Pittsburgh Bill]

Thank you for the find ! I will pay much better attention next time !

 

[msinger]

If you ever have any doubts, just read the message that is displayed on the screen after clicking either of those icons. DJI GO makes you confirm the action.

 

[Pittsburgh Bill]

Will do. I had family over for Mother's Day and was definitely distracted.

Thank you again !