Rainbow for DJI Mavic Mini
- Thread starter Pepponeskie
- Start date
When I attempted to run a waypoint mission, I got a "loadWaypoint Failed" error message.
You haven't tested... Because RedWaypoint APP does not upload Waypoints, it uses virtualstick commands
Sorry, I was confused by the comment about Red Waypoint in this thread which is about Rainbow, which is what I tested and which didn't work. Apologies. I did finally figure out how to set a POI, but I haven't retested Red Waypoint because it's too windy today -- tomorrow looks better.
I bought an MM today, seeing that Rainbow was now offering support for it. I only have a 32-bit Android phone, so I can't install the DJI Fly app. The Rainbow app recognizes my drone and I can tilt the gimbal, but I can't get it to take off.
I am a little confused by the activation process: when I set it up the first time, I can to create a DJI account, but I am guessing I also have to activate the drone itself? Do I need the DJI Fly app for that?
I am a little confused by the activation process: when I set it up the first time, I can to create a DJI account, but I am guessing I also have to activate the drone itself? Do I need the DJI Fly app for that?
Yes you need the DJI Fly app to activate the drone.
Rainbow can NOT replace the DJI Fly & DJO GO(4) app !
It simply lacks some importent featerus like Compas, IMU, RC & Gimbal calibration, unlocking GEO zones, Find My Drone, Emergency Propeller Stop, Payload mode, Flight Mode, Advanced Gimbal Settings, Advanced Shooting Settings, Transmission Settings and Firmware updates.
Rainbow can NOT replace the DJI Fly & DJO GO(4) app !
It simply lacks some importent featerus like Compas, IMU, RC & Gimbal calibration, unlocking GEO zones, Find My Drone, Emergency Propeller Stop, Payload mode, Flight Mode, Advanced Gimbal Settings, Advanced Shooting Settings, Transmission Settings and Firmware updates.
I was able to activate the drone on a relative's iPhone X, then run Rainbow on my 32-bit Samsung phone and fly the drone. I could see the camera feed in the Rainbow app on my Samsung, so that is encouraging.
I tried again later at my own home using my 32-bit Samsung and Rainbow app, and the app said "Electromagnetic Interference" so I will try again tomorrow.
Has anyone else been able to run Rainbow on a 32-bit device?
I tried again later at my own home using my 32-bit Samsung and Rainbow app, and the app said "Electromagnetic Interference" so I will try again tomorrow.
Has anyone else been able to run Rainbow on a 32-bit device?
I have been looking at the Red Waypoint app.
It's a more mature app than Rainbow, it has a decent web-page with an online user manual, a FAQ page, a What's new page, a Features page and a CONTACT page.
At this time they are testing the app on a DJI CrystalSky monitor and are considering to include Compas calibration.
Rainbow has just released v4.7: 'Fixed Mavic Mini Waypoint support'
Today (2020-08-06) I installed the new Litchi Beta app v4.18.0_beta-g which now has support for the Mavic Mini. It shouldn't take long for the definite version to be released.
Litchi runs on 32bit devices and CAN replace the DJI Fly app !
However: Waypoint, Orbit, Follow Me(GPS-based) and (Active)Track are NOT supported for the Mavic Mini, DJI did not unlock these features in the SDK.
I will do some testing soon.
It's a more mature app than Rainbow, it has a decent web-page with an online user manual, a FAQ page, a What's new page, a Features page and a CONTACT page.
At this time they are testing the app on a DJI CrystalSky monitor and are considering to include Compas calibration.
Rainbow has just released v4.7: 'Fixed Mavic Mini Waypoint support'
Today (2020-08-06) I installed the new Litchi Beta app v4.18.0_beta-g which now has support for the Mavic Mini. It shouldn't take long for the definite version to be released.
Litchi runs on 32bit devices and CAN replace the DJI Fly app !
However: Waypoint, Orbit, Follow Me(GPS-based) and (Active)Track are NOT supported for the Mavic Mini, DJI did not unlock these features in the SDK.
I will do some testing soon.
Last edited:
"Electromagnetic Interference" can cause permanent compass abnormalities making a compass calibration needed.
Compass abnormalities/(electro)magnetic interference is one of the most common causes for Fly-aways!
I did some testing today with the MAVIC MINI.
Rainbow totally failed:
Rainbow needs internet access during operation AND the free version does NOT fly waypoints.
I DO NOT RECOMMENT BUYING THIS APP !
RedWaypoint did OK.
It has a lot more features than Rainbow.
I was able to fly a mission with 3 simple waypoints, however the free version ignored any POI and you have to launch the drone manually before executing a mission.
That's all I tested for these 2 apps.
More info on RedWaypoint: Red Waypoint APP
Then I tested the new Litchi v4.18.0_BETA-g
As expected WayPoints, Orbit and Track did not work.
Follow and Focus DID work and very good.
In Folow-mode you can set:
Drone Altitude, Distance, Heading (free to choose from a compass, or free to choose relative to the Devices), Subject height, Subject Offset (if you don't want it to be in the middle of the frame), Altitude reference (Power-on elevation or Mobile device elevation), RC joystick dis-enabled, Horizontal movement dis-enabled.
In Focus-mode you can set:
Subject (Mobile Device or POI), Subject Height, Aircraft Rotation (Auto or Off), Joystick Reference (Default/Aircarft/Mobile Device Orientation) and Yoystick Speed Limiter in %.
These 2 modes depend on a good GPS-fix of the Mobile device !
Rainbow totally failed:
Rainbow needs internet access during operation AND the free version does NOT fly waypoints.
I DO NOT RECOMMENT BUYING THIS APP !
RedWaypoint did OK.
It has a lot more features than Rainbow.
I was able to fly a mission with 3 simple waypoints, however the free version ignored any POI and you have to launch the drone manually before executing a mission.
That's all I tested for these 2 apps.
More info on RedWaypoint: Red Waypoint APP
Then I tested the new Litchi v4.18.0_BETA-g
As expected WayPoints, Orbit and Track did not work.
Follow and Focus DID work and very good.
In Folow-mode you can set:
Drone Altitude, Distance, Heading (free to choose from a compass, or free to choose relative to the Devices), Subject height, Subject Offset (if you don't want it to be in the middle of the frame), Altitude reference (Power-on elevation or Mobile device elevation), RC joystick dis-enabled, Horizontal movement dis-enabled.
In Focus-mode you can set:
Subject (Mobile Device or POI), Subject Height, Aircraft Rotation (Auto or Off), Joystick Reference (Default/Aircarft/Mobile Device Orientation) and Yoystick Speed Limiter in %.
These 2 modes depend on a good GPS-fix of the Mobile device !
Last edited:
Ali H Alhosani
Member
Is there someone who used Rainbow app could confirm its functions after last updates?
I liked the screen layout and the fact that hight appear on top of each waypoint. And the Curve size option for each waypoint might make the video smoother ( I guess ) . I used it once (free version) and my mistake that I didnt play with the options before excuting the mission. Red waypoint seems similar but I liked the layout of Rainbow app. Rainbow developer confirm that it support orbit, waypoint , follow me but doesnt support tracking object. While Red wayppint says that Orbit, FollowMe & ActiveTrack are not compatible with Mavic Mini
I liked the screen layout and the fact that hight appear on top of each waypoint. And the Curve size option for each waypoint might make the video smoother ( I guess ) . I used it once (free version) and my mistake that I didnt play with the options before excuting the mission. Red waypoint seems similar but I liked the layout of Rainbow app. Rainbow developer confirm that it support orbit, waypoint , follow me but doesnt support tracking object. While Red wayppint says that Orbit, FollowMe & ActiveTrack are not compatible with Mavic Mini
Hi All. Will I have to log in to use the paid version? I intend to use Rainbow on a dedicated device that will not have networking access. Does using the app without an account limit any functionality?
For manual control, Rainbow does what I need. I just need more than 3 flights form the free version. Is just installing the paid version sufficient, or must I log into it?
For manual control, Rainbow does what I need. I just need more than 3 flights form the free version. Is just installing the paid version sufficient, or must I log into it?
Last edited:
Ctrlx
Member
@Pepponeskie can you release a version also for Huawei AppGallery?It's just released today and with the update that it supports mini.
Worth a try though.
Rainbow for DJI Drones - Apps on Google Play
play.google.com
Similar threads
DJI Drone Deals
New Threads
-
How Will Tariffs on China Affect the U.S. Drone Industry?- Started by The Droning Company
- Replies: 0
-
-
-
-
Forum statistics
