SC FIRMWARE VER 01.00.0700 update problems

cfarnold62 · Sep 10, 2020

I am trying to update the latest firmware for my SC, but it says update when battery is over 20% and memory over 3 GB. It will begin the update then get hung up at 16%. Anyone else having these issues.

Starz · Sep 10, 2020

So, was your battery too low?

lannes · Sep 10, 2020

best to charge the battery full before updating

scoble08 · Sep 11, 2020

lannes said:
best to charge the battery full before updating

....and take the SD card out.

omoss · Sep 11, 2020

And if the SC starts to beep, quickly press the power button, otherwise it’s just switching off during the update process...

scoble08 · Sep 11, 2020

omoss said:
And if the SC starts to beep, quickly press the power button, otherwise it’s just switching off during the update process...

Yeah..be sure to set the auto turn off to never b4 updating.

zeusfl · Sep 11, 2020

If you still have problems, do the update by DJI assistan with the computer instead to the wifi update.

cfarnold62 · Sep 12, 2020

Starz said:
So, was your battery too low?

No it was fully charged

lannes · Sep 12, 2020

cfarnold62 said:
No it was fully charged

Have you adjusted the SC display sleep to 30 minutes, so that it doesn't cut in while the update is going.

Willllburrrr · Oct 16, 2020

As previously mentioned I charged battery to 100%, took out SD card, let SC connect to my WI FI and had same problem. I connected SC to my laptop and was going through the entire process when it stopped again at 16%. I left it alone for a few minutes and then SC started to reboot a couple times as it was installing the download.