Setting way points with a starting address

[BernieA]

When starting to create a Air 3 way point mission on the RC2, is there a way to enter a specific location (address) to start from? I am planning a trip and would like to create some way point missions for the location I will be traveling to. searching the map on the RC2 is very cumbersome.
Thank you.

 

[swoermck]

The easiest way is to plot one or two waypoint where you want to fly in Litchi, export it is as a csv file, convert it with Litchiutilities into a KMZ file, and upload the file into your controller.

Sounds a bit complicated, but after you did it a few times it is an easy workflow.

I also created a detailed step-by-step guide for this, maybe easier to follow:

DJI Air 3 for photogrammetry and Litchi

This tutorial explain how to do a complete field mapping, including how to map a field in dronelink first! For your case, only chapter 3 (exporting a litichi mission) to chapter 7 (opening the new waypoint mission) are relevant, so skip chapters 1 and 8.

 

[BernieA]

The easiest way is to plot one or two waypoint where you want to fly in Litchi, export it is as a csv file, convert it with Litchiutilities into a KMZ file, and upload the file into your controller.

Sounds a bit complicated, but after you did it a few times it is an easy workflow.

I also created a detailed step-by-step guide for this, maybe easier to follow:

DJI Air 3 for photogrammetry and Litchi

This tutorial explain how to do a complete field mapping, including how to map a field in dronelink first! For your case, only chapter 3 (exporting a litichi mission) to chapter 7 (opening the new waypoint mission) are relevant, so skip chapters 1 and 8.

Thank you swoermck. I will give it a try.