some guy doing an FCC hack permanent for RC pro Controller

DAFlys · Oct 23, 2023

schip589 said:
Hatam, Tnks, no it is de DJI RC controller.
no third-party app.

You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

herasymcuk · Oct 23, 2023

DAFlys said:
You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

Yes, just remember: 32 bit app only

albertino78 · Oct 23, 2023

DAFlys said:
A screenshot of the transmission graph would prove the patch was applied but I wouldn’t waste your time.

Here you are you can also view the firmware version

and ce mode

schip589 · Oct 23, 2023

DAFlys said:
You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

so far i am, but now my knowledge stopped.

>> adb devices -l
List of devices attached
5HAZK6P001980E unauthorized transport_id:1

iaTa · Oct 23, 2023

DAFlys said:
You can install 3rd party apps. Use adb control app from your computer to install the apps. You also need a launcher. The S9 Samsung launcher works quite well and the Apk is easy to find.

On this note, do you know if anyone has tried adb updating the DJI Fly app with the latest APK on the RC controller?

E.g. right now the RC is running v1.11.4 and the latest available is v1.12.2.

schip589 · Oct 23, 2023

Hatem said:
Can you install a third-party app?

If the answer is yes.

Install the file manager

Drag a backup for the Dji fly app

Then delete the application

And reinstall without opening

Then do the correction

schip589 said:
Hatam, Tnks, no it is de DJI RC controller.
no third-party app.

YES i DID.
see this result so far:

so far i am, but now my knowledge stopped.
My computer windows 11 .

>> adb devices -l
List of devices attached
5HAZK6P001980E unauthorized transport_id:1

but now wthat tot do ???
Could you advice me please ?

fischli · Oct 23, 2023

Firmware Update failed for me... :-(

albertino78 · Oct 23, 2023

fischli said:
Firmware Update failed for me... :-(

What firmware? How did you tried? FCC patch already installed?

fischli · Oct 23, 2023

I come from .0500 --> Install FCC-Patch again --> Update via DJI Assistant 2 --> Update Error!
I tried second time --> now Im on .0600 - but I have to wait the cool down than I try the FCC-Patch again.

Hope the best I dont loose FCC.

albertino78 · Oct 23, 2023

If you were on .500 patched and you reapplied the patch before trying to update….. maybe you can try to repatch in about 2 hours successfully ….. finger crossed

fischli · Oct 23, 2023

I also think that it is not necessary to install the patch again beforehand. But you basically only have one try. So it's better to do this and wait 2 hours.

Update: FW = .0600 and FCC = active... good luck at the others

scoopdreams · Oct 24, 2023

Followed the instructions and updated from 1.02.0200 to 1.03.0600. FCC is active still.

DAFlys · Oct 24, 2023

schip589 said:
so far i am, but now my knowledge stopped.

>> adb devices -l
List of devices attached
5HAZK6P001980E unauthorized transport_id:1

You’re not running the 1.4 patch as that makes adb authorised permanently.

Flashheart · Oct 24, 2023

Any notable updates with the .0600 update? If not, I'll just stay on .0500.

fischli · Oct 24, 2023

No. "fixed some bugs".... But I think its better to update when its safe with FCC. because when you miss updates its harder to update later with FCC. But its only my theory...

01.03.0600 firmware for DJI RC is out

Does anyone have a changelog for this 0600 release ? Is it possible to reapply the djifcc mod after the 0600 update ?

mavicpilots.com

pyrolator · Oct 25, 2023

Updated like user @fischli
Run Patch 1.4 before update to .600.
1st update to .600 fails, second was okay.
After Cool down time reapply Patch again and FCC mode works for me .

fischli · Oct 26, 2023

Does anyone actually know what this CoolDown is for? So I mean 2 hours is really annoying to wait.

pyrolator · Oct 26, 2023

fischli said:
Does anyone actually know what this CoolDown is for? So I mean 2 hours is really annoying to wait.

I have to disappoint you but there is a 2 hour wait.
this is the cooldown time

fischli · Oct 26, 2023

Yes I know. But whats the reason?

scoopdreams · Oct 26, 2023

fischli said:
Yes I know. But whats the reason?

Probably to prevent server overload and fair play for all users. Won't be surprised some will constantly spam the FCC hack tool if they fail, or maybe even DJI can try to overload the server.

It's actually good practice though I do think two hours is a bit draconian.

Maybe 30min would be better, but we have no idea how many folks are actually using the FCC hack.