DJI Mavic, Air and Mini Drones
Friendly, Helpful & Knowledgeable Community
Join Us Now

some guy doing an FCC hack permanent for RC pro Controller

V1.02 of DJI RC seemingly is out and about (and 1.12.3 for DJI fly app) . With changes around the 120m CE limit and such .

I would say , do not jump blindly into this update .
 
Last edited:
Has anyone found an option to get the mod on 0500 or later if you didn't apply the new version of the mod before upgrading? 😫
 
Has anyone found an option to get the mod on 0500 or later if you didn't apply the new version of the mod before upgrading? 😫
There's a different mod from drone-tweaks that just got launched that can do it. It's not as simple as you have to apply it each flight.
 
  • Like
Reactions: hjadr
I did the FFC patch in July 2023 and haven't done any FW updates since. Today I went from .100 to .600 FW and the FCC patch still works.

I did what others have said:

1) Downloaded & reinstalled the patch (patch applied successfully)
2) Updated DJIRC from .100 to .600 FW.
3) Reinstalled the patch but had the error about waiting.
4) Updated the M3P whilst waiting.
5) Waited about three hours and reinstalled the patch (patch applied successfully)
6) Check radio and it is in FCC mode (the line below the 1km is about 5mm lower than when in CE mode)

So anyone with concerns, just do as I did above. Worked a charm.
 
Stai attento !
Massima altezza per .0500 = 1000 metri.
L'aggiornamento per il .0600 = 500 metri!!
Il downgrade è impossibile.

Be care !
Maxi hight for the .0500 = 1000 meter.
The update for the .0600 = 500 meter !!
Downgrade is impossible.
but are we sure of what you say that from the DJI RC firmware 01.03.600 the height limit is increased to 500 ml???
 
I have patched my RC2 successfully!! Lets hope its possible to bypass 120m in Europe...
 
How`s with open ADB after 2nd run of fcc tool ? It`s still working to upload launcher or it`s disabled now ?
 
@FiShBuRn @Hatem
Can you share a screenshot of the Channelmode? I purchased the fcc rc hack today, but I am unsure if it is really in fcc mode.Screenshot_20231113-150421.png


what I also recognize is, that the fcchack downgrades the RC2 to 1.00.00... are you able to upgrade to 2.0 again after the patch?
 
@FiShBuRn @Hatem
Can you share a screenshot of the Channelmode? I purchased the fcc rc hack today, but I am unsure if it is really in fcc mode.View attachment 170082


what I also recognize is, that the fcchack downgrades the RC2 to 1.00.00... are you able to upgrade to 2.0 again after the patch?
It downgrades it to 01.00.0000 then after it adds a big file which somehow makes the adb port open you csan update to latest firmware and apply fcc patch to it after
 
Okey, I will try again today - I used Adbcontrol but it didn't show anything during fcc process...
Same for me, adbappcontrol says disconnect everytime I plug in the RC2. (Crosschecked with my S23, there adbappcontroll connects direcly)

Will try out again this evening
 
Last edited:
Be care !
Maxi hight for the .0500 = 1000 meter.
The update for the .0600 = 500 meter !!
Downgrade is impossible.
Can someone better explain this? Is there a limit with the new firmware or is it about the fcc limit removal?
 
Can install a launcher and other apps
I tried again - and this time whole process was different. At first time I got only 3 steps to make it work. At yesterday trial it takes 4-5 application re-run to work, but at 3rd step adb was open and it was possible to install apps. What launcher you're using and how you make it possible to get back from DJI fly to launcher ? - for me none of slides from edges work for that. Ideally would be to add launcher from RC pro controller but I can't find it anywhere.
 
  • Like
Reactions: harryemery92
I tried again - and this time whole process was different. At first time I got only 3 steps to make it work. At yesterday trial it takes 4-5 application re-run to work, but at 3rd step adb was open and it was possible to install apps. What launcher you're using and how you make it possible to get back from DJI fly to launcher ? - for me none of slides from edges work for that. Ideally would be to add launcher from RC pro controller but I can't find it anywhere.
I'm using atv launcher pro I will send it on here to download
 

DJI Drone Deals

New Threads

Forum statistics

Threads
135,312
Messages
1,604,821
Members
163,772
Latest member
UAS0311
Want to Remove this Ad? Simply login or create a free account