Get more from your Mavic
The largest Mavic community in the world
Join Us Now

spare part list

yaken

New Member
Joined
Jul 31, 2020
Messages
4
Reaction score
0
Age
45
Location
norway
Does there exist a spare part list With numbers on the various parts for the Mavic Air 1? I just bought a used drone and there are some parts missing on the rear legs. Both landing brackets are missing this causes the drone not to calibrate the sensors and will not fly. If anyone have a link to a spare part list or a link to a dealer selling all parts international I would appreciate it
 

lannes

Well-Known Member
Joined
Jul 27, 2017
Messages
2,116
Reaction score
1,237
Location
Australia
I believe the rear arms are sold as one piece and need to be re soldered to the ESC board.
The descriptions are

DJI Mavic Air Repair Part 08 Rear Right Arm
DJI Mavic Air Repair Part 07 Rear Left Arm



Can you explain the calibration error some more, the diagram in the app instructions is looking at the drone side on not top down.
Which position does the calibration fail, I've never experienced or heard of the leg extensions impacting on the calibration positions ?
 
  • Like
Reactions: Ian~L

yaken

New Member
Joined
Jul 31, 2020
Messages
4
Reaction score
0
Age
45
Location
norway
I believe the rear arms are sold as one piece and need to be re soldered to the ESC board.
The descriptions are

DJI Mavic Air Repair Part 08 Rear Right Arm
DJI Mavic Air Repair Part 07 Rear Left Arm



Can you explain the calibration error some more, the diagram in the app instructions is looking at the drone side on not top down.
Which position does the calibration fail, I've never experienced or heard of the leg extensions impacting on the calibration positions ?
 

yaken

New Member
Joined
Jul 31, 2020
Messages
4
Reaction score
0
Age
45
Location
norway
I’m fairly new to this, but after calibrating the compas I tought I could start flying, but the «ready to fly» indicator is red and say «cant fly». Looking thru the settings and all is normal except IMU. So I try to start calibrating sensors in advanced settings, but the calibrating indicator almost reaches the end, but not finished...and I’ve waited for 5 minutes and I wount finish...I’ve read its a process done in about 30 seconds
 

lannes

Well-Known Member
Joined
Jul 27, 2017
Messages
2,116
Reaction score
1,237
Location
Australia
I’m fairly new to this, but after calibrating the compas I tought I could start flying, but the «ready to fly» indicator is red and say «cant fly». Looking thru the settings and all is normal except IMU. So I try to start calibrating sensors in advanced settings, but the calibrating indicator almost reaches the end, but not finished...and I’ve waited for 5 minutes and I wount finish...I’ve read its a process done in about 30 seconds
Try reformatting the SD card in a pc then try the calibration again

On the IMU sensor page, do you get an data error messages ?
 

yaken

New Member
Joined
Jul 31, 2020
Messages
4
Reaction score
0
Age
45
Location
norway
Try reformatting the SD card in a pc then try the calibration again

On the IMU sensor page, do you get an data error messages ?
I will try formating the card when I Get home. No error messages at all....it just wont complete the calibration
 
All E RC Mavic Drones

New Threads

Forum statistics

Threads
90,296
Messages
1,040,077
Members
118,644
Latest member
Adde