Unable to get mavic pro to complete the imu calibration.

[spinbp5er]

Hello everyone, I’ve apparently got an issue w/calibrating the imu. The calibration goes through and passes the first 3 movements (flat, right side, left side) but when I put it back on flat for the final calibration it does not conclude, it does nothing. I e even waited up to 30 minutes and shut the mavic off, the controller of and reset the app on my iPhone and re-started the process 2 additional times and I still get the routine with no advancement. Any ideas as to how to get this imu calibrated?

 

[Qoncussion]

First things first ~how level is the surface on which you are calibrating? Dead-level is the best. Next, are you on or near any metal objects? I once had problems calibrating on my office desk, as it's a metal desk. I moved to the dining room table and it calibrated on the first attempt.

 

[spinbp5er]

First things first ~how level is the surface on which you are calibrating? Dead-level is the best. Next, are you on or near any metal objects? I once had problems calibrating on my office desk, as it's a metal desk. I moved to the dining room table and it calibrated on the first attempt.

I am attempting to do the IMO calibration outside in my backyard on my patio. There is however a metal patio table next to where I am trying to do this so I will move and see if any change is possible. Thank you.

 

[Qoncussion]

I know metal affects the compass calibration ~wasn't so sure about it affecting the IMU cal. As such - ask yourself, does your patio have rebar under the surface?

 

[msinger]

I know metal affects the compass calibration ~wasn't so sure about it affecting the IMU cal.

Metal does not affect the IMU calibration.

@spinbp5er, make sure you're performing the IMU calibration exactly like this:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[kakao]

Thank you

 

[spinbp5er]

Metal does not affect the IMU calibration.

@spinbp5er, make sure you're performing the IMU calibration exactly like this:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Thank you singer, your input was very helpful. I appreciate your feed on this issue. I’m having a blast flying this thin* for sure!!

 

[spinbp5er]

I know metal affects the compass calibration ~wasn't so sure about it affecting the IMU cal. As such - ask yourself, does your patio have rebar under the surface?

Thank you qoncussion, your insight was very helpful as well as useable in sustaining the resolution. I love flying this thing!!