Unpacking M2P For First Time - Sticker Removal?

[MAVIC_2_YTS]

Good evening forum,

Well, I finally did it, I have unpackaged my new M2P and accessories. I took great care in the whole process reviewing every piece to ensure there was no damage, scuffing, Etc... Everything appears to be 100% so far.

I just removed all the stickers / packaging from the AC itself however, there is one on the back of the Gimbal that I am not sure if I am supposed to remove or not. I did read previously that people experienced scratching on their Gimbal because of the cover so wasn't sure if this sticker / tape wasn't some type of safety measure and wanted to check before removing.



Any thoughts?

Thanks!

 

[Thomas B]

Remove the sticker and carefully clean the area of any residual adhesive while stabilizing the gimbal.

 

[ZX14-R]

Leave it.

 

[MAVIC_2_YTS]

Well, I'm still just as confused with a response from each corner of the ring

 

[MAVIC_2_YTS]

Thanks @Thomas B & @ZX14-R

Upon further inspection, I carefully manipulated the gimbal and found that it would "bind" on the tabs hanging down so I opted to gently remove them while supporting the gimbal.

The removal went without issue and no residue / stickiness was left behind and the gimbal now moves with ease.

Thanks again!