update on recent mod to front arms of MM

[TDZHDTV]

Any Reason you fitted Props First?

Mine are in Shenzhen, Quangdong

To check the rigidity and screw quality, the Sunnylife were poor resulting in the prop screw binding on the propeller

 

[wjkrysak]

Hi, yes I’ve fitted these tonight, observations over the Sunnylife covers, firstly I fitted the props to the covers first, they seated firmly without binding the props (the Sunnylife cover trapped the props). Secondly, the screws come pre coated with thread lock and you get a mini screwdriver also. Hovers fine indoors, will test tomorrow and report back.

Thanks for sharing your comparison. I am still on the fence about covering the motors, but the like quality of these.

 

[TDZHDTV]

You can tell by the inclination of the mini it was quite windy, not prop strike with very aggressive Sport mode flying, I will monitor motor temps.

 

[Ron (MM)]

used plastic spoons and superglue. all good ideas.

 

[cadbob]

Not sure how I should take this, just noticed seller name when tracking it! LOL

 

[cadbob]

Well covers came hopefully I'm virus free lol
The props should not hit body now, if the arms twist a little in flight, looks like a lot of clearence