Just received my Crystal Sky 7.85" High Brightness monitor. Did all the upgrades to the monitor firmware as well as DJI Go 4. Weather has not been good the past week to fly here in the Northeast. I wanted to check that the monitor worked with my M2Z so connected everything and fired up the monitor, RC and M2Z. Connected to the monitor from the RC using the USB C port to the usb port on the bottom of the RC. Could not connect. Disconnected the cable first from the RC and reconnected, then from the monitor and reconnected, nothing. Finally, I used a usb to micro usb cable and connected to the side of the monitor and, it worked.
Any ideas why the usb c port didn't work?
Any ideas why the usb c port didn't work?