Video flicker

[Makofire1]

I’m brand new to drones and videography and noticed that while playing back my video, there was a sort of flashing or flickering along some objects. I’m flying a M2P and shooting 4K, all auto. Is this normal? How can I prevent it or get rid of it? Different settings? Thanks in advance for your help!

 

[DebianDog]

how old is your device you are watching it on?

 

[msinger]

Can you post the video so we can see what you're describing?

 

[Former Member]

Try changing your sharpness to +1

 

[Makofire1]

how old is your device you are watching it on?

MacBook Air 2 years old

 

[Makofire1]

Try changing your sharpness to +1

I’ll give that a go....thank you.

 

[DebianDog]

MacBook Air 2 years old

Hardware HEVC 265 is only supported on mac with Kaby lake processors so I "think" you are good

 

[Mossiback]

Try recording at a lower resolution. If that fixes it then your problem probably is...
• Display device video card insufficient
• Display program insufficient
• SD card insufficient (write speed too slow)

Those are the three most common causes of 4K video problems. By insufficient I mean under-powered or out of spec for 4K.

 

[Makofire1]

Try recording at a lower resolution. If that fixes it then your problem probably is...
• Display device video card insufficient
• Display program insufficient
• SD card insufficient (write speed too slow)

Those are the three most common causes of 4K video problems. By insufficient I mean under-powered or out of spec for 4K.

I’ll give that a go...I don’t suspect the SD card is the issue, I got the fastest Sandisk sells. I’ll try watching the video on a different device. Thanks