I'm looking for a screwdriver kit from Amazon that can work With the screws keeping the top shell screwed on the top of the drone, and the screws keeping the gimbal pieces and camera together. I need to replace a gimbal ribbon cable.
What screwdriver kit is needed for the Mavic pro?
- Thread starter Kywon McCain
- Start date
Here’s what I use to take MPP apart…
Wera 05073675001 Kraftform... https://www.amazon.com/dp/B009ODV0PI?ref=ppx_pop_mob_ap_share
Kilrah
Well-Known Member
iFixit Mako Driver Kit: Precision Screwdriver Bit Set for Electronics
iFixit's 4 mm aluminum screwdriver handle with magnetic bit socket, knurled grip, and swivel top — plus 64 essential precision bits to tackle sneaky security screws.
www.ifixit.com
Won't have to worry about having the right screwdriver for quite a while with that.
- Joined
- Feb 8, 2018
- Messages
- 8,452
- Reactions
- 13,696
- Age
- 55
This has been a really nice set up : The magnet and the electronic screwdriver is priceless
https://www.amazon.com/dp/B095LDQGTH?psc=1&ref=ppx_yo2_dt_b_product_details
Phantomrain.org
Gear to fly in the Rain
https://www.amazon.com/dp/B095LDQGTH?psc=1&ref=ppx_yo2_dt_b_product_details
Phantomrain.org
Gear to fly in the Rain
The short stubby hexagonal-bit screw drivers are all well and good but there are a few places on the Mavic Mini and the Mavic 2 where I find the shaft of the bit is too short i.e. screws at the bottom of a hole or where a landing leg gets in the way of the hexagonal and a long thin shaft is useful.
Similar threads
