With the RC Plus controller, does the WB37 battery charge inside the controller or do I need a separate charger?

[wrybread]

I just picked up an RC Plus controller, love the thing. It's running a mod that makes it work with my Mavic 3 Pro. I have a USB C monitor on the way so I'd like a bit of extra battery capacity. If I buy a WB37 battery for the Plus do I also need to buy a charger for it, or will the battery charge inside the controller?

 

[Cafguy]

I DO NOT recommend you use that controller if you need the mod to make it work!!!!
BUT if you decide to keep using it the controller has a charging port for the battery. You will need to provide your own charging equipment (cable and charger) I would refer to the manual for the proper equipment.
I have had the chance to fly with one of those when testing the inspire Truthfully I dont know how anyone could use it more than a few times. It feels very strange and is not at all comfortable.............Then again I am only a flyer not a photographer so theres that.

https://dl.djicdn.com/downloads/DJI_RC_Plus/20230518UM/DJI_RC_Plus_User_Manual_EN_v2.0.pdf

 

[wrybread]

The mod works perfectly. The travesty is that a mod is required at all since the Plus and Pro are mostly the same device as far as controlling a drone is concerned, just different hardware specs. But DJI being DJI artificially makes them not compatible. The mod just removes that nonsense.

I massively prefer the Plus to the Pro controller. Much bigger and brighter screen, better battery life, weather proof, I like the sticks on the side of the screen as opposed to on top, the aux battery will be nice when using a USB C screen, it has better ports, much better build quality, and in my opinion better form factor. I prefer everything about it. Same price as the Pro too if buying on eBay. To me it feels to the Pro controller as the Pro controller feels to the RC. But to each their own of course.

Thanks for the info on the battery.

 

[Recoveryone]

I'm a bit confused, what mod is needed? My Pro Plus charges both batteries with no problems. I use the WB37 battery with my D2-RTK GNSS, Phantom 4 RTK, each controller charges and GNSS setup can charge the WB37 internally.

 

[wrybread]

There's more info in this thread:

S

Bought and Tested the DJI RC Plus on Ebay that claims to work with the Mavic series of Drones. Guess What? IT DOES WORK! I'll tell you why.

Jul 30, 2024

This Ebay RC Pro Plus works with the Mavic series of drones because the seller has modified the operating system. He changed it from the OS that runs the RC Plus and Changed it to the RC Pro OS. There is a caveat though. The seller emphasizes that some buttons don't work and the firmware cannot be upgraded.

Here is his quote: "
Important Note: The remote control you cannot upgrade controller firmware, otherwise it doesn't work. Thanks
Remote control button R1,R2,R3, C3 not working
Because this remote control is installed with DJI RC Pro system, not DJI RC PLUS system in controller, so...

• StevenBrodsky
• Replies: 50
• Forum: General Discussions

The gist is that you flash the RC Pro's firmware onto the RC Plus so the Plus thinks it's a Pro. I bought the controller already modded. It works super well, the only downside is that the 3 buttons under the right stick and the C3 button don't work since they aren't on the Pro. No biggie to me, I don't even use the 3 assignable buttons under the left stick.

Was glad to have the Plus controller today, got caught in a bit of a squall. I try to keep my drones dry of course but it was nice to not have to worry about the controller.

 

[Recoveryone]

I see! the modded Plus controllers I've seen on Ebay. I get it now

 

[wrybread]

Exactly. I'm blown away by how good it is.

I haven't looked into it since I don't have any big boy drones like a Matrice that I could use a stock plus with, but I do plan to look into how to do the mod in case I want to update the firmware later. Tho
ough I can't imagine needing to, since it's an oc3 controller and any new drones are at least oc4. But on the off chance DJI makes the pro controller oc4 compatible. Which will probably never happen though.