Recent content by Haloweenhamster

most likely They spec FCC Compliant: 4.3 mi (7 km); CE Compliant: 2.5 mi (4 km) But I was only getting 600-1000m not 4km

Nope it gets your location multiple ways; gps, sim in phone etc

Not far off half for the mavic, call that not restricted? FCC Compliant: 4.3 mi (7 km); CE Compliant: 2.5 mi (4 km)

Because of transmitting laws they will on every product

Glad I stopped using them think sandisk make the most SD cards though so bad ones are more noticeable, eg if 0.001% of cards have issues and sandisk made 1000x more than lexar

I'm surprised by bad reviews of the battery life, mine is really good, RC charges phone whilst flying so stays at 100% I've left it in my bag powered on for 2 weeks and it was still powered and had over 20% left

Do some reading on rolling back the platinum Dji stopped installing a SD cars so one needs to be added the esc fault maybe due to the old firmware not having the new esc module, some people have the issue others don't

I stopped using sandisk years ago due to bad batches that were faulty, some had issues from the start others failed after 3-6 months I always buy from reliable sources so none are fake They even admitted it about 7 years ago Currently using lexar, its what came with the mavic and they work...

What paste did you use?

Re bind RC as primary, sounds like its linked as secondary

Just looked and the apple TV box is bigger than I thought It does work off mains but the psu inside converts to 12v so it can be modified Apple TV 4K Teardown I've only ever seen 12v routers though

Did you open it to reseat the mesh? Its held in place with 4 dots of glue If the glue has given way and you just pulled the mesh from the outside then its possible for it to jam again There is a over temp shutdown and if the mesh isn't secure and blocks the fan again you may have more of an...

I use the x626 and use video cashe and it runs smoothly It has a brighter screen and better colour than my Sony XZ Only issue I have had is that you can get video lag with wifi turned on, as long as you turn wifi off its fine

Routers run off 12v Apple TV I've never used or seen but it looks to small to have a mains psu inside so will likely be 5v, 9v, 12v or 24v If they are more sensitive to voltage ie don't like 14.4v you can either fit a DC/DC converter to give a stable voltage or replace the lead acid battery for...

SD card is only for the flight logs not firmware It'll flash the firmware ok but when it tries the write a flight log it can't as the location isn't there so it throws up SD card error and flight controller error