Welcome Mavic Pilot!
Jump in and join our free DJI Mavic community today!
Sign up

ribbon

  1. R

    Please help! 0x800000 error, no Gimbal Status option in the Options menu and no SD card.

    I purchased a second-hand Mavic 1 pro recently with the owner stating that it needed a gimbal ribbon replacement. It was a good price so I figured I could try and fix it as a project. I have an issue after replacing the gimbal ribbon and video cable. I still get the 0x800000 error but the...
  2. N

    gimbal motor overload

    Hi everyone, I had a minor crash with my mavic pro two weeks ago. I was getting the errors: 1.Gimbal motor overloaded. Check weather gimbal clamp is removed. 2. Gimbal is restarting. Check that gimbal rotates smoothly if restart fails again. Everything looked fine until I saw one of the LVDS...
  3. D

    Camera vibration

    My Mavic's gimbal and camera suddenly started to go nuts on start up, this would stop and then repeat every 30 secs or so (my Mavic has never had any crashes or hard landings and has only been flown about 8 times) I replaced the ribbon and put it all back together and it appeared to fix it...
  4. A

    Gimbal board broken from crash? ribbon & cam line cable replaced, neither gimbal movement nor video!

    Hi Guys, i crashed my mavic, ribbon cable and camera line cable ripped off. I bought replacements on amazon and replaced them with the help of a YT video. I recon everything went fine, all connectors fit good. BUT: I have no gimbal movement when turning the mavic on (no calibration, no...
  5. P

    Broken Gimble Mount and Ribbon Cable

    New to MavicPilots, excited to be on board. A few weeks back I had the dreaded first crash with my Mavic. Got caught a top a rather large tree, had to throw something to get it down, smacked into the dirt. The black plastic gimble/camera mount broke (I understand this is very common and see a...
  6. C

    Can someone who is currently fixing a torn gimbal ribbon lay it flat folded & post it?

    Can someone who is currently fixing a torn gimbal ribbon lay it flat folded & post it? Every YouTube video, every single one of them is terrible.l. It's connector number two where everyone has the problem and that's where the mistakes are as far as the slack. It's amazing! The people that made...
  7. K

    Top speed into a tree... Gimbal / Camera repair

    Had the drone only a week and crashed it straight into a tree. I Tested it after the crash and it had gimbal overload, clearly saw ribbon cable snapped. Camera was all working. Replaced gimbal ribbon cable very carefully making sure not to pinch the video or ribbon. Putting it all back...
  8. Z

    Mavic Pro - no video after LSVD cable replacement

    Hi guys, recently I crashed my Mavic and on first sight LSVD (video signal silver cable) was ripped off and vibration plate was broken. At that moment I didn't see that ribbon cable has been ripped too. I have order replacements part (LSVD cable and plate) and that came to me after 3 weeks. I...
  9. D

    Just a ribbon?

    My gimbal is no longer working and I see that ONE ribbon appears to be the problem. It has a sticker end and looks as if it was just taped somewhere. Does that end insert and transmit data or does it just provide tension? I guess I don't care what it does or doesn't do, I'm not about to take...