mnoutdoors Well-Known Member Joined Nov 9, 2017 Messages 364 Reactions 100 Mar 18, 2018 #21 Just a word of caution, don’t apply power till you have a antenna attached.
droneuser Well-Known Member Joined Mar 19, 2017 Messages 1,327 Reactions 244 Location anywhere Mar 18, 2018 #22 ohhh yup don't want to burn the amps out cause of no load I am going to go with a 9dbi whip ant I have to cut thru woods
ohhh yup don't want to burn the amps out cause of no load I am going to go with a 9dbi whip ant I have to cut thru woods
mnoutdoors Well-Known Member Joined Nov 9, 2017 Messages 364 Reactions 100 Mar 18, 2018 #23 That should get you out there, about 48 dbm ( if anyone asks you have lots of cable loss )
droneuser Well-Known Member Joined Mar 19, 2017 Messages 1,327 Reactions 244 Location anywhere Mar 18, 2018 #24 I also have a 15dbi whip on the way too!!! ohh yes that's what I am going to say! lol
mnoutdoors Well-Known Member Joined Nov 9, 2017 Messages 364 Reactions 100 Mar 18, 2018 #25 I have tested the 8watt units and after about 20 minutes the signal goes up because the Mavic RC increases It’s output as a time function, I believe. tested 42dbm.every 3dbm gain doubles wattage
I have tested the 8watt units and after about 20 minutes the signal goes up because the Mavic RC increases It’s output as a time function, I believe. tested 42dbm.every 3dbm gain doubles wattage
lannes Well-Known Member Joined Jul 27, 2017 Messages 3,321 Reactions 2,300 Location Western Australia Mar 18, 2018 #26 droneuser said: @lannes do you think he would be better off getting titan switch? Click to expand... If he gets an Atlas he can change it into Switch with an easy modification later if he needs it Titan Drones, Inc.
droneuser said: @lannes do you think he would be better off getting titan switch? Click to expand... If he gets an Atlas he can change it into Switch with an easy modification later if he needs it Titan Drones, Inc.