Anyone know of a protective lens cap

[ff22]

I guess I find it odd that a camera does not have a protective lens cap. I guess the INSTANT SHOT would be deterred by a lens cap.

I'm trying to determine the size, possibly 29mm?

 

[leenanj]

I guess I find it odd that a camera does not have a protective lens cap. I guess the INSTANT SHOT would be deterred by a lens cap.

I'm trying to determine the size, possibly 29mm?

Well if your into 3D printing I made one out of rubber flex.
Here is the link to the 3D file.

Lens Cap for DJI Osmo Action Camera by SlashForty

Just a quick model for a lens cap for the Osmo Action Camera.Print in Flex or Semi-Flex, I don't think it'll work at all with a hard material.Mine is printed with ColorFabb nGen for the first 1.6mm, then a filament swap to ColorFabb nGen Flex.Edited on 2nd June 2019 to add a slightly smaller...

www.thingiverse.com

 

[ff22]

Well if your into 3D printing I made one out of rubber flex.
Here is the link to the 3D file.

Lens Cap for DJI Osmo Action Camera by SlashForty

Just a quick model for a lens cap for the Osmo Action Camera.Print in Flex or Semi-Flex, I don't think it'll work at all with a hard material.Mine is printed with ColorFabb nGen for the first 1.6mm, then a filament swap to ColorFabb nGen Flex.Edited on 2nd June 2019 to add a slightly smaller...

www.thingiverse.com

Well, I guess I could go out and buy one of those, too! (g)

 

[ff22]

Well if your into 3D printing I made one out of rubber flex.
Here is the link to the 3D file.

Lens Cap for DJI Osmo Action Camera by SlashForty

Just a quick model for a lens cap for the Osmo Action Camera.Print in Flex or Semi-Flex, I don't think it'll work at all with a hard material.Mine is printed with ColorFabb nGen for the first 1.6mm, then a filament swap to ColorFabb nGen Flex.Edited on 2nd June 2019 to add a slightly smaller...

www.thingiverse.com

Looking at 3d printing services in the Seattle area. So, can one grab your design and head to a 3d print service? Any idea what the cost of one item of that size might run?

Thanks in advance.

 

[leenanj]

Looking at 3d printing services in the Seattle area. So, can one grab your design and head to a 3d print service? Any idea what the cost of one item of that size might run?

Thanks in advance.

I never used a service to make one so have no idea. Sorry nut much help.

 

[Prmath]

Go to a camera store and take your camera....... probably find one

 

[ff22]

Go to a camera store and take your camera....... probably find one

I hit a bigger one today but did not have the camera along. They only offered one in smaller size.

I've no doubt PgyTech or one of the others will be offering something.

 

[Skyreat]

Skyreat protector lens cap will release in 1 week.

 

[Ynksfan27]

Skyreat protector lens cap will release in 1 week.

You gonna be looking for any beta testers?

 

[ff22]

You gonna be looking for any beta testers?

Hey, I started this thread - I should get first shot! (g)

Skyreat: Keep us informed.

 

[fozzzy]

Skyreat bits should be in Amazon UK thursday/Friday of this week

 

[Prmath]

Skyreat bits should be in Amazon UK thursday/Friday of this week

Thanks for the info

 

[ff22]

Skyreat bits should be in Amazon UK thursday/Friday of this week

Amazon US - the octopus that ate Seattle! (that's home!)

 

[Prmath]

I’ll let y’all know when it comes.....

 

[ff22]

Found it US Amazon.

Or go whole hog with one of these two sets:

Amazon.com: 44-in-1 Outdoor Sports Camera Accessories Set Kit for DJI OSMO Action: Gateway

Amazon.com: 44-in-1 Outdoor Sports Camera Accessories Set Kit for DJI OSMO Action: Gateway

www.amazon.com

Amazon.com: 36-in-1 Outdoor Sports Camera Accessories Set Kit for DJI OSMO Action: Gateway

Amazon.com: 36-in-1 Outdoor Sports Camera Accessories Set Kit for DJI OSMO Action: Gateway

www.amazon.com

Of course, it takes forever to ship.

I walked four miles with mine today on a rolling trail and down and up a steep set of stairs merely holding it by the tripod attachment. It really was amazingly steady but I've never had a video camera before. Also did not do bad going from really shady forest to dappled lighting to open sun. I ran out of battery. Now I have to figure out what mode/resolution/frame, etc I was shooting in.

 

[Skyreat]

SKYRET Silicone Soft Lens cap available now, Will in stock on amazon in 3 days, We're plan to offer some sample for testing ,If you're interested in testing,Please contact with us by email: [email protected] , thank you !

 

[Skyreat]

Skyreat Osmo Action Screen protector 2-pack is available on amazon now:Amazon.com : SKYREAT 2-Pack Screen Protector Compatible with DJI Osmo Action, 9H Hardness Anti-Scratch Tempered Glass for Osmo Action Accessories : Camera & Photo

 

[ff22]

Skyreat Osmo Action Screen protector 2-pack is available on amazon now:Amazon.com : SKYREAT 2-Pack Screen Protector Compatible with DJI Osmo Action, 9H Hardness Anti-Scratch Tempered Glass for Osmo Action Accessories : Camera & Photo

Ordered!

 

[fozzzy]

Skyreat Osmo Action Screen protector 2-pack is available on amazon now:Amazon.com : SKYREAT 2-Pack Screen Protector Compatible with DJI Osmo Action, 9H Hardness Anti-Scratch Tempered Glass for Osmo Action Accessories : Camera & Photo

Ill keep checking for uk stock to hit [emoji106]

 

[Skyreat]

Hey, I started this thread - I should get first shot! (g)

Skyreat: Keep us informed.

Hello Fred,

The Lens cap is available on amazon.com now, and I have placed a amazon order for you,you can receive it in 3-5 days.

Product link :Amazon.com : SKYREAT Silicone Soft Rubber Lens Cap Cover Accessories for DJI Osmo Action Camera : Camera & Photo

Deric